ORGAN PRINTING - 3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine - page 336

Hutmacher, D.W., Singh, H., 2008. Computational luid dynamics for improved bioreactor design and 3D culture.
Trends in Biotechnology 26 (4), 166 .
Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., Forgacs, G., 2010. Tissue engineering by
self-assembly and bioprinting of living cells. Biofabrication 2, 022001 .
Kan, P., Miyoshi, H., Yanagi, K., Ohshima, N., 1998. Effects of shear stress on metabolic function of the coculture
system of hepatocyte/nonparenchymal cells for a bioartiicial liver. ASAIO Journal 44 (5), M441 .
Kasko, A.M., Wong, D.Y., 2010. Two-photon lithography in the future of cell-based therapeutics and regenerative
medicine: a review of techniques for hydrogel patterning and controlled release. Future Medicinal Chemistry 2, 1669 .
Khalil, S., Sun, W., 2009. Bioprinting endothelial cells with alginate for 3D tissue constructs. Journal of
Biomechanical Engineering 131 (11), 111002 .
Kim, M.R., Jeon, E.S., Kim, M.Y., Lee, J.S., Kim, J.H., 2009. Thromboxane a(2) induces differentiation of human
mesenchymal stem cells to smooth muscle-like cells. Stem Cells 27 (1), 191 .
Koch, L., Kuhn, S., Sorg, H., Gruene, M., Schlie, S., Gaebel, R., Polchow, B., Reimers, K., Stoelting, S., Ma,
N., Vogt, P.M., Steinhoff, G., Chichkov, B., 2010. Laser printing of skin cells and human stem cells. Tissue
Engineering Part C 16 (5), 847 .
Kumar, G., Tison, C.K., Chatterjee, K., Pine, P.S., McDaniel, J.H., Salit, M.L., Simon, C.G., 2011. The determination
of stem cell fate by 3D scaffold structures through the control of cell shape. Biomaterials 32 (35), 9188 .
Kumar, G., Waters, M.S., Farooque, T.M., Young, M.F., Simon, C.G., 2012. Freeform fabricated scaffolds with
roughened struts that enhance both stem cell proliferation and differentiation by controlling cell shape.
Biomaterials 33 (16), 4022 .
Leach, J., Sinclair, G., Jordan, P., Courtial, J., Padgett, M.J., Cooper, J., Laczik, Z., 2004. 3D manipulation of
particles into crystal structures using holographic optical tweezers. Optics Express 12, 220 .
Lee, J., Kim, S.H., Kim, Y.C., Choi, I., Sung, J.H., 2013. Fabrication and characterization of microluidic
liver-on-a-chip using microsomal enzymes. Enzyme and Microbial Technology 53 (3), 159 .
Li, M., Tian, X., Schreyer, D.J., Chen, X., 2011. Effect of needle geometry on low rate and cell damage in the
dispensing-based biofabrication process. Biotechnology Progress 27 (6), 1777 .
Li, Y.J., Batra, N.N., You, L., Meier, S.C., Coe, I.A., Yellowley, C.E., Jacobs, C.R., 2004. Oscillatory luid low affects
human marrow stromal cell proliferation and differentiation. Journal of Orthopedic Research 22 (6), 1283 .
Maher, P.S., Keatch, R.P., Donnelly, K., Mackay, R.E., Paxton, J.Z., 2009. Construction of 3D biological matrices
using rapid prototyping technology. Rapid Prototyping Journal 15 (3), 204 .
Masuzaki, T., Ayukawa, Y., Moriyama, Y., Jinno, Y., Atsuta, I., Ogino, Y., Koyano, K., 2010. The effect of a single
remote injection of statin-impregnated poly (lactic-co-glycolic acid) microspheres on osteogenesis around
titanium implants in rat tibia. Biomaterials 31, 3327 .
Melchels, F.P.W., Domingos, M.A.N., Klein, T.J., Malda, J., Bartolo, P.J., Hutmacher, D.W, 2012. Additive
manufacturing of tissues and organs. Progress in Polymer Science 37 (8), 1079 .
Melchels, F.P.W., Feijen, J., Grijpma, D.W., 2010. A review on stereolithography and its applications in biomedical
engineering. Biomaterials 31, 6121 .
Mezel, C., Souquet, A., Hallo, L., Guillemot, F., 2010. Bioprinting by laser-induced forward transfer for tissue
engineering applications: jet formation modeling. Biofabrication 2 (1), 014103 .
Miranda, J.P., Rodrigues, A., Tostoes, R.M., Leite, S., Zimmerman, H., Carrondo, M.J., Alves, P.M., 2010.
Extending hepatocyte functionality for drug-testing applications using high-viscosity alginate-encapsulated
three-dimensional cultures in bioreactors. Tissue Engineering Part C 16 (6), 1223-1232 .
Mironov, V., Boland, T., Trusk, T., Forgacs, G., Markwald, R.R., 2003. Organ printing: computer-aided jet-based
3D tissue engineering. Trends in Biotechnology 21 (4), 157 .
Mironov, V., Kasyanov, V., Drake, C., Markwald, R.R., 2008. Organ printing: promises and challenges. Regenerative
Medicine 3 (1), 93 .
Mironov, V., Kasyanov, V., Markwald, R.R., 2011. Organ printing: from bioprinter to organ biofabrication line.
Current Opinions in Biotechnology 22 (5), 667 .