Biomedical Engineering Reference
In-Depth Information
Benyus, J.M.: Biomimicry: Innovation Inspired by Nature. Harper Collins, New York (2002)
Díaz Lantada, A., Lafont Morgado, P., Echávarri Otero, J., Chacón Tanarro, E., De la Guerra
Ochoa, E., Munoz-Guijosa, J.M., Muñoz Sanz, J.L.: Biomimetic computer-aided design and
manufacturing of complex biological surfaces. In: Biodevices 2012 - International Conference
on Biomedical Electronics and Devices. IEEE-EMBS, Vilamoura (2012)
De la Guerra Ochoa, E., Del Sordo Carrancio, D., Echávarri Otero, J., Chacón Tanarro, E., Díaz
Lantada, A., Lafont Morgado, P.: The infl uence of textured surfaces on the lubrication of arti-
fi cial joint prostheses. In: Biodevices 2012 - International Conference on Biomedical
Electronics and Devices. IEEE-EMBS, Vilamoura (2012)
Gómez Ribelles, J.L., Monleón Pradas, M., García Gómez, R., Forriol, F., Sancho-Tello, M.,
Carda, C.: The role of three-dimensional scaffolds in the regeneration of joint cartilage. In:
Biodevices 2010 - International Conference on Biomedical Electronics and Devices: Special
Session on Rapid Prototyping for Improving the Development of Biodevices. IEEE Engineering
in Medicine and Biology Society, Valencia (2010), 20-23 Jan 2010
Guo, X., Liu, X., Zhang, B., Hu, G., Bai, J., et al.: A combined fl uorescence and microcomputer
tomography system for small animal testing. IEEE Trans. Biomed. Eng.
58
, 2876-2883 (2010)
Hollister, S.J.: Porous scaffold design for tissue engineering. Nat. Mater.
4
, 518-524 (2005)
Jakab, K., Norotte, C., Marga, F., Murphy, K., Vunjak-Novakovic, G., Forgacs, G., et al.: Tissue
engineering by self-assembly and bio-printing of living cells. Biofabrication
2
, 022001 (2010)
Kanani, C.: Cell printing: a novel method to seed cells onto biological scaffolds. Ph.D. thesis,
Worcester Polytechnic Institute (2012)
Langer, R.S., Vacanti, J.P.: Tissue engineering. Science
260
, 920-926 (1993)
Lenaghan, S.C., Serpersu, K., Xia, L., He, W., Zhang, M., et al.: A naturally occurring nanomate-
rial from the Sundew (Drosera) for tissue engineering. Bioinspir. Biomim.
6
, 0460009 (2011)
Li, S.J., Xiong, Z., Wang, X.H., Yan, Y.N., Liu, X.H., Zhang, R.J., et al.: Direct fabrication of a
hybrid cell/hydrogel construct by a double-nozzle assembling technology. J. Bioact.
Biocompatible Pol.
24
, 249-265 (2009)
Marga, F., Jakab, F., Khatiwala, C., Shepherd, B., Dorfman, S., Hubbard, B., Colbert, S., Gabor, F.,
et al.: Toward engineering functional organ modules by additive manufacturing. Biofabrication
4
, 022001 (2012)
Melchels, F.P.W., Domingos, M.A.N., Klein, T.J., Malda, J., Bartolo, P.J., Hutmacher, D.W.:
Additive manufacturing of tissues and organs. Prog. Polym. Sci. (2012). doi:
10.1016/j.
Mironov, V., Trusk, T., Kasyanov, V., Little, S., Swaja, R., Markwald, R., et al.: Biofabrication: a
21st century manufacturing paradigm. Biofabrication
1
(2), 022001 (2009)
Norotte, C., Marga, F.S., Niklason, L.E., Forgacs, G., et al.: Scaffold free vascular tissue engineer-
ing using bioprinting. Biomaterials
30
, 5910-5917 (2009)
Ovsianikov, A., Gruene, M., Pfl aum, M., Koch, L., Maiorana, F., Wilhelmi, M., Haverich, A.,
Chichkov, B., et al.: Laser printing of cells into 3D scaffolds. Biofabrication
2
, 014104 (2010)
Shi, H., Farag, A.A., Fahmi, R., Chen, D.: Validation of fi nite element models of liver tissue using
micro-CT. IEEE Trans. Biomed. Eng.
55
, 978-985 (2008)
Some Interesting Related Websites
http://reprap.org/wiki/RepRap
.
Accessed Mar 2013
http://www.digilabglobal.com
.
Accessed Mar 2013
http://www.digilabglobal.com/celljet
.
Accessed Mar 2013
http://www.envisiontec.de
. Accessed Mar 2013
http://www.fractal-bio.com
. Accessed Mar 2013
http://www.skyscan.be
. Accessed Mar 2013
Search WWH ::
Custom Search