Porous and Lattice Structures for Biodevices with Advanced Properties - Advanced Design and Manufacturing Technologies for Biomedical Devices - page 131

References
Álvarez Elipe, J.C., Díaz Lantada, A.: Comparative study of auxetic geometries by means of
computer-aided design & engineering resources. Submitted to “Smart Materials and
Structures”, 21 (10), 105004 (2012)
Álvarez Elipe, J.C.: Diseño y fabricación de geometrías auxéticas y porosas con aplicación en
Biongeniería. Final Degree Thesis (advisor Díaz Lantada, A.), Universidad Politécnica de
Madrid (2012)
Ashby, M.F.: Materials Selection in Mechanical Design, 3rd edn. Butterworth-Heinemann, Oxford
(2005)
Ashby, M.F., Jones, D.R.H.: Engineering Materials 1, 2nd edn. Butterworth-Heinemann, Oxford
(1996)
Ashby, M.F., Jones, D.R.H.: Engineering Materials 2, 2nd edn. Butterworth-Heinemann, Oxford
(1998)
Bendsoe, M.P., Sigmund, O.: Topology Optimization: Theory, Methods and Applications.
Springer, Berlin (2003)
Bianchi, M., Scarpa, F., Smith, C.W.: Shape memory behaviour in auxetic foams: mechanical
properties. Acta Mater. 58 (3), 858-865 (2010)
Capolino, F.: Metamaterials Handbook. Vol. I: Theory and Phenomena of Metamaterials. Taylor
and Francis, Boca Raton (2009a)
Capolino, F.: Metamaterials Handbook. Vol. II: Applications of Metamaterials. Taylor and Francis,
Boca Raton (2009b)
Díaz Lantada, A.: Handbook of Active Materials for Medical Devices: Advances and Applications.
PAN Stanford, Singapore (2012)
Evans, K.E.: Auxetic polymers: a new range of materials. Endeavour 15 (4), 170-174 (1991)
Griffi n, A.C., Kumar, S., Mc Mullan, P.J.: Textile fi bers engineered from molecular auxetic poly-
mers, pp. 1-2. National Textile Center Research Briefs - Materials Competency, (2005)
He, C., Liu, P., Mc Mullan, P.J., Griffi n, A.C.: Toward molecular auxetics: main chain liquid crys-
talline polymers consisting of laterally attached para-quaterphenyls. Phys. Status Solidi B 242 ,
576-584 (2005)
Kadic, M., Buckmann, T., Stenger, N., Thiel, M., Wegener, M.: On the practicability of pentamode
mechanical metamaterials. Appl. Phys. Lett. 100 (19), 191901 (2012)
Lakes, R.S.: Foam structures with a negative Poisson's ratio. Science 235 (4792), 1038-1040
(1987)
Liu, Y., Hu, H.: A review on auxetic structures and polymeric materials. Sci. Res. Essays 5 (10),
1052-1063 (2010)
Scarpa, F., Jacobs, S., Coconnier, C., Toso, M., Di Maio, D.: Auxetic shape memory alloy cellular
structures for deployable satellite antennas: design, manufacture and testing. EPJ Web Conf. 6 ,
27001 (2010)
Schramm, U., Zhou, M.: Recent developments in the commercial implementation of topology
optimization. Solid Mech. Appl. 137 (6), 238-249 (2006)
Stampfl , J., Baudis, S., Heller, C., Liska, R., Neumeister, A., Kling, R., Ostendorf, A., Spitzbart,
M.: Photopolymers with tunable mechanical properties processed by laser-based high-
resolution stereolithography. J. Micromech. Microeng. 18 , 125014 (2008)
Tan, T.W., Douglas, G.R., Bond, T., Phani, A.S.: Compliance and longitudinal strain of cardiovas-
cular stents: infl uence of cell geometry. J. Med. Dev. 5 , 041002 (2011)
Varadan, V.K., Xiaoning, J., Varadan, V.V.: Microstereolithography: For 3D MEMS Fabrication.
Wiley, United Kingdom (2001)
Wohlers, T.: Wohlers' report: additive manufacturing state of the industry. Wohlers Associates
(2010)