Civil Engineering Reference
In-Depth Information
Brosilow C, Joseph B (2002) Techniques of model-based control. Prentice Hall, New York
Camacho EF, Berenguel M, Rubio FR, Martínez D (2012) Control of solar energy systems. Springer,
New York
Cengel JA (2006) Heat and mass transfer: a practical approach. 3rd edn. McGraw Hill Higher
Education, New York
Christian JE (2009) Moisture control in buildings: the key factor in mold prevention, ASTM inter-
national, chap Moisture sources
Churchill SW, Chu HHS (1975) Correlating equations for laminar and turbulent free convection
from a vertical plate. Int J Heat Mass Transf 18:1323-1329
Diasty RE, Fazio P, Budaiwi I (1992) Modeling of indoor air humidity: the dynamic behaviour
within an enclosure. Build Environ 19:61-73
Emmerich SJ, Persily AK (2001) State of the art: Review of CO
2
demand controlled ventilation
technology and application. National Institute of Standards and Technology Administration, US
Technical Report
Fakra AH, Miranville F, Boyer H, Guichard S (2011) Development of new model to predict indoor
daylighting: integration in CODYRUN software and validation. Energy ConversManag 52:2724-
2734
Fisher DE, Pedersen CO (1997) Convective heat transfer in building energy and thermal load
calculations. ASHRAE Trans 103(2):137-148
Gong W (2002) Modeling, control and optimization of complex systems. Kluwer Academic Pub-
lishers, Dordrecht
Guzmán JL, Rivera D, Dormido S, Berenguel M (2009a) ITSIE: an interactive software tool for
system identification education. In: Proceedings of the 15th IFAC symposium on system identi-
fication, St. Malo, France,
http://aer.ual.es/ITSIE/
.
Accessed 8 June 2014
Guzmán JL, Rivera D, Dormido S, Berenguel M (2009b) Teaching system identification through
interactivity. In: Proceedings of the 8th IFAC symposium on advances in control education
(ACE09), Kumamoto, Japan,
http://aer.ual.es/ITSIE/
.
Accessed 8 June 2014
Harriman LG (2002) The dehumidification handbook. Munters corporation, Amesbury
Hazyuk I, Ghiausa C, Penhouet D (2012) Optimal temperature control of intermittently heated
buildings using model predictive control: Part i. building modeling. Build Environ 51:379-387
Hernández A (1994a) NTP 343: Nuevos criterios para futuros estándares de ventilación de interiores
(in Spanish). Instituto Nacional de Seguridad e Higiene en el Trabajo Ministerio de Trabajo y
Asuntos Sociales, Spain
Hernández A (1994b) NTP 742: Ventilación general de edificios (in Spanish). Instituto Nacional
de Seguridad e Higiene en el Trabajo Ministerio de Trabajo y Asuntos Sociales, Spain
Hosni MH, Beck BT (2009) Update to measurements of office equipment heat gain data. Technical
report, Ashrae Research Project 1482-RP
Huang GB, Chen YQ, Babri H (2000) Classification ability of single hidden layer feedforward
neural networks. IEEE Trans Neural Netw 11(3):799-801
Incropera FP, De Witt DP (2002) Fundamentals of heat and mass transfer. 5th edn. Wiley, New York
Jiang Z, Rahimi-Eichi H (2009) Design, modeling and simulation of a green building energy system.
In: IEEE power and energy society general meeting, PES'09. Canada
Kelly KM (1982) Indoor moisture effects on structure, comfort, energy consumption and health.
Proceedings ASHRAE/DOE conference thermal performance of the exterior envelope of build-
ings. Las Vegas, USA, pp 1007-1032
Kennel MB, Brown R, Abarbanel HDI (1992) Determining embedding dimension for phase-space
reconstruction using a geometrical construction. Phys Rev A 45(6):3403-3411
KummerM, André P, Nicolas J (1996) Development of simplifiedmodels for solar buildings optimal
control. In: Proceedings EuroSun, Freiburg, Germany pp 1055-1061
Lawrence TM, Braun JE (2006) Evaluation of simplified models for predicting Co
2
concentrations
in small commercial buildings. Build Environ 41:184-194
Ljung L (1999) System identification. Theory for the User. 2nd edn. Prentice Hall, New Jersey
Ljung L (2007) System Identification toolbox 7. User's guide, The MathWorks
