Quality Assurance/Quality Control (QA/QC) for Waste Stabilization/Solidification - Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes - page 333

3. Kosmatka, S. H., Kerkhoff, B., and Panarese, W. C., Design and Control of Concrete

Mixtures , 14th Edition, Portland Cement Association, Skokie, IL, 2002.

4. ASTM C 1451, Practice for Determining Uniformity of Ingredients of Concrete from

a Single Source, Annual Book of ASTM Standards , Vol. 04.02, Aggregates, Concretes,
American Society for Testing & Materials, Philadelphia, 2003.

5. Stegemann, J. A. and Cote, P. L., Investigation of Test Methods for Solidified Waste

Evaluation — a Cooperative Program, Report EPS 3/HA/8, Environment Canada,
1991.

6. ACI 214-77, Recommended Practice for Evaluation of Strength Test Results of

Concrete, American Concrete Institute, Farmington, MI, 2000.

7. Exner, J. H., A sampling strategy for remedial action at hazardous waste sites,

Hazardous Waste and Hazardous Materials, Vol. 2, No. 4, 1985, pp. 503-521.

8. Conner, J. R., Chemical Fixation and Solidification of Hazardous Wastes , Van

Nostrand Reinhold, New York, 1990.

9. U.S. EPA, Test Methods for the Evaluation of Solid Wastes, Physical/Chemical

Methods, Office of Water and Waste Management, Washington, D.C., SW-846, 1986.

10. U.S. EPA, Soil Sampling Quality Assurance User's Guide, EPA/600/8-89/046, Envi-

ronmental Monitoring System Laboratory, Las Vegas, NV, March 1989.

11. U.S. EPA, Guide for Conducting Treatability Studies Under CERCLA, Interim

Report, EPA/540/2-89/085, Office of Research and Development, Cincinnati, OH,
December 1989.

12. Means, J. L. et al., The Application of Solidification/Stabilization to Waste Materials ,

Lewis Publishers, Boca Raton, FL, 1995.

13. Keith, L. H., Principles of Environmental Sampling , American Chemical Society,

Washington, D.C., 1988.

14. Gibert, R. O., Statistical Methods for Environmental Pollution Monitoring , Van

Nostrand Reinhold, New York, 1987.

15. U.S. EPA, Superfund Treatability Study Protocol: Identification/Stabilization of Soils

Containing Metals, Phase II Review Draft, Office of Research and Development,
Cincinnati, OH, and Office of Emergency and Remedial Response, Washington, D.C.,
1990.

16. Shi, C., Stegemann J., and Caldwell, R., Quality Analysis/Quality Control Tests for

Field Stabilization/Solidification — Part II: Untreated Waste, Silicate Solution and
Solidified Waste, Waste Management , Vol. 15, No. 7, pp. 507-513, 1995a.

17. Shi, C., Stegemann, J., and Caldwell, R., Quality Analysis/Quality Control Tests for

Field Stabilization/Solidification — Part I: Dry Cementing Additives, Waste Manage-
ment , Vol. 15, No. 4, pp. 265-270, 1995b.

18. ASTM D 2216, Standard Test Method for Laboratory Determination of Water (Moisture)

Content of Soil and Rock, Annual Book of ASTM Standards , Vol. 04.08, Soil and
Rocks; Dimension Stone: Geosynthetics, American Society for Testing & Materials,
Philadelphia, 2003.

19. ASTM D 4643 Test Method for Determination of Water (Moisture) Content of Soil by

Microwave Oven Method, Annual Book of ASTM Standards , Vol. 04.08, Soil and
Rocks; Dimension Stone: Geosynthetics, American Society for Testing & Materials,
Philadelphia, 2003.

20. Del Cul, G. D. and Gilliam, T. M., “Development of an In-line Grout Meter for

Improved Quality Control,” Stabilization and Solidification of Hazardous, Radioac-
tive, and Mixed Wastes , T. Michael Gilliam and Carlton C. Wiles, Eds., ASTM STP
1123, American Society for Testing and Materials, Philadelphia, 1992, pp. 395-406.