Testing and Performance Criteria for Stabilized/Solidified Waste Forms - Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes - page 317

122. DEFRA and Environment Agency, The Contaminated Land Exposure Assessment

Model (CLEA): Technical Basis and Algorithms , R&D Publications CLR10, Envi-
ronment Agency, UK, 2002.

123. SNIFFER, Method for Deriving Site Specific Human Health Assessment Criteria

for Contaminants in Soil, SNIFFER report LQ01, Scotland and Northern Ireland
Forum for Environmental Research, UK, 2003.

124. ASTM E1739-95, Standard guide for risk-based corrective action applied at petro-

leum release sites, Annual Book of ASTM Standards , Vol. 11.04, American Society
for Testing and Materials, West Conshohocken, PA, 2003.

125. ASTM E2081-00, Standard guide for risk-based corrective action, Annual Book of

ASTM Standards , Vol. 11.04, American Society for Testing and Materials, West
Conshohocken, PA, 2003.

126. BPRISC, Risk-Integrated Software for Clean-Ups . www.bprisc.com, 2003.

127. U.S. NRC, Technical Position on Waste Form, Low-Level Waste Management

Branch, Division of Low-Level Waste Management and Decommissioning, U.S.
Nuclear Regulatory Commission, Office of Nuclear Material Safety and Safeguards,
Washington, D.C., January 1991.

128. U.S. EPA, Prohibition on the Disposal of Bulk Liquid Hazardous Waste in Landfills

— Statutory Interpretive Guidance , Office of Solid Waste and Emergency Response
(OSWER) Policy Directive No. 9487.00-2A, EPA/530-SW-016, Washington, D.C.,
1986.

129. Mulder, E., Personal communication, TNO, Delft, The Netherlands, 2002.

130. Sherwood, P.T., Soil Stabilization with Cement and Lime , HMSO, London, 1993.

131. Department of Transport, Specification for Highway Works , 6th ed., HMSO, London

1986.

132. Al-Tabbaa, A. and Evans, C.W., Pilot in situ auger mixing treatment of a contaminated

site. Part 1: Treatability study, Proceedings of the Institution of Civil Engineers,
Geotechnical Engineering , Vol. 131, pp. 52-59, 1998.

133. Bates, E.R., Personal communication, USEPA, 2002.

134. ASTM B553 (withdrawn in 1991), Test method for thermal cycling of electroplated

plastics, Annual Book of ASTM Standards , Vol. 02.05, American Society for Testing
and Materials, West Conshohocken, PA, 1990.

135. ANSI/ANS 55.1, Solid radioactive waste processing system for light water cooled

reactor plant, American Nuclear Society, La Grange Park, IL, 1992.

136. Kosson, D.S., van Der Sloot, H.A., Sanchez, F., and Garrabrants, A.C., An Integrated

Framework for Evaluating Leaching in Waste Management and Utilization of Sec-
ondary Materials, Environmental Engineering Science , Vol. 19, No. 3, pp. 159-204,
2002.

137. Garrabrants, A.C. and Kosson, D.S., Use of a chelating agent to determine the metal

availability for leaching from soils and wastes, Waste Management and Research,
20, 155, 2000.