Testing and Performance Criteria for Stabilized/Solidified Waste Forms - Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes - page 314

69. BS 1377: Part 4(5), Compaction related tests, Methods of Test for Soils for Civil

Engineering Purposes , British Standards Institution, London, 1990.

70. BS 1924: Part 2(2.2), Determination of the moisture condition value (MCV), Stabi-

lised Materials for Civil Engineering Purposes, Methods of Test for Cement-
Stabilised and Lime-Stabilised Material, Compaction Related Tests, British Stan-
dards Institution, London, 1990.

71. BS 1377: Part 4(3), Compaction related tests, Methods of Test for Soils for Civil

Engineering Purposes, British Standards Institution, London, 1990

72. ASTM C143/C143M-00, Standard test method for slump of hydraulic-cement con-

crete, Annual Book of ASTM Standards , Vol. 04.02, American Society for Testing
and Materials, West Conshohocken, PA, 2003.

73. ASTM D 6103-97, Standard Test Method for Flow Consistency of Controlled Low

Strength Material (CLSM), Annual Book of ASTM Standards, Vol. 04.08, Soil and
Rocks; Dimension Stone: Geosynthetics, American Society for Testing and Materials,
West Conshohocken, PA, 2003.

74. BS EN 12350: Part 2, Slump test, Testing Fresh Concrete, British Standards Insti-

tution, London, 2000.

75. ASTM C939, Standard test method for flow of grout for pre-placed aggregate concrete

(flow cone method), Annual Book of ASTM Standards , Vol. 04.02, American Society
for Testing and Materials, West Conshohocken, PA, 2003.

76. ASTM 1362, Standard Test Method for Flow of Freshly Mixed Hydraulic Cement

Concrete, Annual Book of ASTM Standards , Vol. 04.02, American Society for Testing
and Materials, West Conshohocken, PA, 2003.

77. BS EN 12350: Part 5, Flow table test, Testing Fresh Concrete, British Standards

Institution, London, 2000.

78. ASTM C191-01a, Standard test method for time of setting of hydraulic cement by

vicat needle, Annual Book of ASTM Standards , Vol. 04.01, American Society for
Testing and Materials, West Conshohocken, PA, 2003.

79. BS 4550: Part 3(6), Tests for setting time, Methods of Testing Cement, Physical

Tests, British Standards Institution, London, 1978.

80. ASTM C266-99, Standard test method for time of setting of hydraulic cement by

Gillmore needles, Annual Book of ASTM Standards , Vol. 04.01, American Society
for Testing and Materials, West Conshohocken, PA, 2003.

81. ASTM C186-98, Standard test method for heat of hydration of hydraulic cement,

Annual Book of ASTM Standards , Vol. 04.01, American Society for Testing and
Materials, West Conshohocken, PA, 2003.

82. BS 4550: Part 3(8), Tests for heat of hydration, Methods of Testing Cement, Physical

Tests , British Standards Institution, London, 1978.

83. Taylor, H.F.W., Cement Chemistry . Thomas Telford, London, 1997.

84. Feldman, F.R. and Ramachandran, V.S., Differentiation of interlayer and adsorbed

water in hydrated Portland cement by thermal analysis, Cement and Concrete
Research , Vol. 1, No. 6, pp. 607-620, 1971.

85. ASTM C151-00, Standard test method for autoclave expansion of Portland cement,

Annual Book of ASTM Standards , Vol. 04.01, American Society for Testing and
Materials, West Conshohocken, PA, 2003.

86. ASTM C157/C157M-99, Standard test method for length change of hardened hydrau-

lic-cement mortar and concrete, Annual Book of ASTM Standards , Vol. 04.02, Amer-
ican Society for Testing and Materials, West Conshohocken, PA, 2003.