Leaching Processes and Evaluation Tests for Inorganic Constituent Release from Cement-Based Matrices - Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes - page 268

REFERENCES

1. Conner, J.R., Chemical Fixation and Solidification of Hazardous Wastes, Van Nos-

trand Reinhold, New York, 1990.

2. Conner, J.R. and Hoeffner, S.L., The history of solidification stabilization technology,

Critical Reviews in Environmental Science and Technology 28, 325, 1998.

3. USEPA, Leachability Phenomena, EPA-SAB-EEC-92-003, USEPA Science Advisory

Board, Washington, D.C., 1991.

4. USEPA, Waste Leachability: the Need for Review of Current Agency Procedures,

EPA-SAB-EEC-COM-99-002, USEPA Science Advisory Board, Washington, D.C.,
1999.

5. Kosson, D.S. et al., An integrated framework for evaluating leaching in waste man-

agement and utilization of secondary materials, Environmental Engineering Science
19, 159, 2002.

6. Lewin, K., Leaching tests for waste compliance and characterisation: recent practical

experiences, The Science of The Total Environment 178, 85, 1996.

7. Glasser, F.P., Chemistry of cement-solidified waste forms, in Chemistry and Micro-

structure of Solidified Waste Forms , Spence, R.D., Ed., Lewis Publishers, Baton
Rouge, LA, 1993, p. 1.

8. Garrabrants, A.C., Sanchez, F., and Kosson, D.S., Changes in constituent equilibrium

leaching and pore water characteristics of a Portland cement mortar as a result of
carbonation, Waste Management 24, 19, 2004.

9. Kosson, D.S., van der Sloot, H.A., and Eighmy, T.T., An approach for estimation of

contaminant release during utilization and disposal of municipal waste combustion
residues, Journal of Hazardous Materials 47, 43, 1996.

10. van der Sloot, H.A., Comparison of the characteristic leaching behaviour of cements

using standard (EN 196-1) cement-mortar and an assessment of their long-term
environmental behaviour in construction products during service life and recycling,
Cement and Concrete Research 30, 1079, 2000.

11. van der Sloot, H.A. et al., Approach towards international standardization: a concise

scheme for testing of granular waste leachability, in Environmental Aspects of Con-
struction with Waste Materials , Goumans, J.J.J.M., van der Sloot, H.A., and Aalbers,
T.G., Eds., Elsevier Science, Amsterdam, 1994, p. 453.

12. Stegemann, J.A. and Côté, P.L., Investigation of test methods for solidified waste

evaluation — a cooperative program, EPS 3/HA/8, 1991.

13. Poon, C.-S. et al., Comparison of the strength and durability performance of normal-

and high-strength pozzolanic concretes at elevated temperatures, Cement and Con-
crete Composites 31, 1291, 2001.

14. Piltner, R. and Monteiro, P.J.M., Stress analysis of expansive reactions in concrete,

Cement and Concrete Composites 30, 843, 2000.

15. Gérard, B. and Marchand, J., Influence of cracking on the diffusion properties of

cement-based materials. Part I. Influence of continuous cracks on the steady-state
regime, Cement and Concrete Research 30, 37, 2000.

16. Basheer, P.A.M., Chidiac, S.E., and Long, A.E., Predictive models for deterioration

of concrete structures, Construction and Building Materials 10, 27, 1996.

17. Walton, J.C. and Seitz, R.R., Fluid flow through fractures in below ground concrete

vaults, Waste Management 12, 179, 1992.

18. Fu, Y.F. et al., Thermal induced stress and associated cracking in cement-based

composite at elevated temperatures. Part II. Thermal cracking around multiple inclu-
sions, Cement and Concrete Composites 26, 113, 2004.