Organic Polymers for Stabilization/Solidification - Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes - page 95

REFERENCES

1. Connor, J.R. Chemical Fixation and Solidification of Hazardous Wastes , Van Nostrand

Publishers, New York, 1990.

2. Lea, F.M. The Chemistry of Cement and Concrete, Third Edition , Chemical Publishing

Co., Inc., New York, 1971.

3. Neilson, R.M., Jr. and Colombo, P. Waste Form Development Program Annual

Progress Report , BNL-51614, Brookhaven National Laboratory, Upton, NY, Septem-
ber 1982.

4. Kalb, P.D. and Colombo, P. Full-Scale Leaching of Commercial Reactor Waste Forms,

Final Report , BNL-35561, Brookhaven National Laboratory, Upton, NY, September
1984.

5. Colombo, P. and Neilson, R.M., Jr. Properties of Radioactive Wastes and Containers,

First Topical Report , BNL-NUREG 50957, Brookhaven National Laboratory, Upton,
NY, August 1979.

6. Lubowitz, H.R., Berham, R.L., Ryan, L.E., and Zakrzewsi, G.A. Development of a

Polymeric Cementing and Encapsulating Process for Managing Hazardous Wastes ,
EPA 600/2-77-045,TRW System Group, August 1977.

7. Mechsner, M.J. Process and Equipment Design for Polymer Stabilization of Mixed

Low-Level Wastes with No Secondary Containment Required; presented at WM 97
Symposium, Tucson, AZ, February 1997.

8. Biyani, R.K., Agamuthu, P., and Mahalingam, R. Polyester Resin Microencapsulation,

in Hazardous and Radioactive Waste Treatment Technology , C.H. Oh, Ed., CRC Press,
Boca Raton, FL, 2001, Chapter 6.4.

9. Franz, E.M., Heiser, J.H., and Colombo, P. Immobilization of Sodium Nitrate Wastes

with Polymers , BNL-52081, Brookhaven National Laboratory, Upton, NY, April 1987.

10. Lawrence, J.R. Polyester Resins, Plastics Applications Series , Van Nostrand Reinhold

Co., New York, 1960.

11. Haighton, A.P. The Solidification of Ion Exchange Wastes, Part 6, Characterization

of a Vinyl Ester Binder , NW/SSD/RR/75/80, Central Electricity Generating Board,
United Kingdom, November 1980.

12. Westick, J.H., Jr. et al. Characterization of Cement and Bitumen Waste Forms Con-

taining Simulated Low-Level Waste Incinerator Ash , NUREG/CR-3798 (PNL-5153),
Pacific Northwest Laboratory, Richland, WA, August 1984.

13. Fuhrmann, M. and Zhou, H. Applicability of an Accelerated Leach Test to Different

Waste Form Materials , presented at Spectrum 94, Seattle, WA, August 1994.

14. Dlouhy, Z. Disposal of Radioactive Wastes, Studies in Environmental Science 15,

Elsevier Scientific Publishing, Amsterdam, 1982.

15. Hasegawa, K. and Li, Y. Explosion of Asphalt-Salt Mixtures in a Reprocessing Plant ,

presented at the AIChE 1999 National Meeting, Houston, TX, 1994.

16. Shin, H.S., Shon, J.S., Yim, S.P., and Kim, K.J. Effect of Additives on the Mechanical

Stability of Bitumen-Based Waste Form, Journal of Environmental Science and
Health, 1998; A33(3): 477-493.

17. American Society of Testing Materials (ASTM), Standard Test Method for Flow

Rates of Thermoplastics by Extrusion Plastometer , ASTM D-1238-90b, Philadelphia,
December 1990.

18. Kalb, P.D., Heiser J.H., and Colombo, P. Polyethylene Encapsulation of Nitrate Salt

Wastes: Waste Form Stability, Process Scale-up, and Economics , BNL-52293,
Brookhaven National Laboratory, Upton, NY, July 1991.