Environmental Applications of Computational Fluid Dynamics - Environmental Modelling: Finding Simplicity in Complexity - page 105

Murakami, S. (1990) Foreword: current status of computational
wind engineering. Journal of Wind Engineering and Industrial
Aerodynamics , 35 , vii.
Murakami, S. (1997) Overview of turbulence models applied in
CWE-97. Proceedings of the Second European and African
Conference of Wind Engineers, Genova, Italy, 22-26 June.
Murakami, S., Mochida, A. and Kazuki, H. (1987) Three-
dimensional numerical simulation of air flow around a cubic
model by means of large eddy simulation. Journal of Wind
Engineering and Industrial Aerodynamics , 25 (3), 291-305.
Naot, D. and Rodi, W. (1982) Calculation of secondary currents
in channel flow. Journal Hydraulic Division ASCE , 108 (HY8),
948-68.
Odoni, N.A. and Lane, S.N. (2010) Knowledge-theoretic models
in hydrology. Progress in Physical Geography , 34 (2), 151-71.
Olsen, N. (2000) Unstructured Hexahedral 3d Grids for CFD
Modelling in Fluvial Geomorphology . Fourth International Con-
ference on Hydroinformatics, Iowa, USA, 2000.
Olsen, N. and Stokseth, S. (1995) Three-dimensional numerical
modeling of water-flow in a river with large bed roughness.
Journal of Hydraulic Research , 33 (4), 571-81.
Owen, J.S., Hargreaves, D.M. and Gu, X.P. (2006) Modelling
the Mechanisms of Vortex induced Reponse in Bridge Decks.
Seventh UK Conference on Wind Engineering. Glasgow, pp.
139-142.
Patankar, S. V. and Spalding, D.B. (1972) A calculation procedure
for heat, mass and momentum transfer in three-dimensional
parabolic flows. International Journal of Heat Mass Transfer , 15 ,
1787-806.
Pender, G. and Neelz, S. (2010) Benchmarking of 2d Hydraulic
Modelling Packages , SC080035/SR2, The Environment Agency
for England and Wales, Bristol.
Rastogi, A. and Rodi,W. (1978) Predictions of heat andmass trans-
fer in open channels. Journal Hydraulic Division , 104 (HY3),
397-420.
Richards, P.J. and Hoxey, R.P. (1993) Appropriate boundary
conditions for computational wind engineering models using
the k-epsilon turbulence model. Journal of Wind Engineering
and Industrial Aerodynamics , 46-47 , 145-53.
Riddle, A., Sharpe, A., McHugh, C. and Stocker, J. (2004) Com-
parisons between fluent and adms for atmospheric dispersion
modelling. Atmospheric Environment , 38 , 1029-38.
Rodi, W. (1980) Turbulence Models and their Application in
Hydraulics. State of the Art Paper , International Association
for Hydraulic Research, Delft.
Rodrıguez, J., Belby, B., Bombardelli, F. et al . (2001) Numerical
and physical modeling of pool-riffle sequences for low-gradient
urban streams. Third International Symposium on Environ-
mental Hydraulics, Tempe, Arizona, USA.
Schneider, G. and Raw, M. (1987) Control-volume finite ele-
ment method for heat transfer and fluid flow using co-located
variables - 1 computational procedure. Numerical Heat Transfer
11 , 363-90.
Schumann, G., Bates, P.D., Horritt, M.S. et al . (2009) Progress in
integration of remote sensing-derived flood extent and stage
data and hydraulic models. Reviews of Geophysics , 47 .

Scorer, R. (1949) Theory of waves in the less of mountains.
Quarterly Journal of the Royal Meteorological Society , 76 , 41-56.
Selvam, P. (1990) Computer simulation of wind load on a house.
Journal of Wind Engineering and Industrial Aerodynamics , 36
(2), 1029-36.
Silvester, S.A., Lowndes, I.S. and Hargreaves, D.M. (2009) A
computational study of particulate emissions from an open
pit quarry under neutral atmospheric conditions. Atmospheric
Environment , 43 , 6415-24.
Sleigh, P.A., Gaskell, P.H., Berzins, M. and Wright, N.G. (1998)
An unstructured finite-volume algorithm for predicting flow in
rivers and estuaries. Computers and Fluids , 27 (4), 479-508.
Smagorinsky, J. (1963) General circulation experiments with prim-
itive equations part 1: basic experiments. Monthly Weather
Review , 91 , 99-164.
Smith, G. D. (1978) Numerical Solution of Partial Differential
Equations: Finite Difference Methods , Oxford University Press,
Oxford.
SOGREAH (2011) Telemac, www.telemacsystem.com/.
Sorenson, OR, SHA and SLS (2004) Boussinesq type model-
ing usning an unstructured finite element technique. Coastal
Engineering , 50 , 181-98.
Spalart, P R. (2001) Young-Person's Guide to Detached-eddy Simu-
lation Grids . NASA Langley Research Center, Hampton VA.
Spalart, P., Jou, W.-H., Strelets, M. and Allmaras, S. (1997)
Comments on the feasibility of les for wings, and on a hybrid
rans/les approach, in Advances in DNS/LES (eds C. Liu and
Z. Liu), Greyden Press, Columbus OH.
Stelling, G.S., Kernkamp, H.W.J. and Laguzzi, M.M. (1998) Delft
Flooding System: APowerful Tool for InundationAssessment based
upon a Positive Flow Simulation , A. A. Balkema, Rotterdam.
Syme, W. (2011) Tuflow , BMT, Brisbane.
Tominaga, Y. and Stathopoulos, T. (2007) Turbulent schmidt
numbers for CFD analysis with various types of flowfield.
Atmospheric Environment , 41 , 8091-9.
Tsuchiya, M., Murakami, S., Mochida, A. et al . (1997) Develop-
ment of a new k

model for flow and pressure fields around a
bluff body. Journal of Wind Engineering and Industrial Aerody-
namics , 67-68 , 169-82.
Versteeg, H.K. and Malalasekera, W. (2007) Introduction to Com-
putational Fluid Dynamics: The Finite Volume Method , Pearson
Education, London.
Villanueva, I. and Wright, N.G. (2006) Linking riemann and
storage cell models for flood prediction. ICE Journal of Water
Management , 159 (1), 27-33.
Wood, N. (2000) Wind flow over complex terrain - a historical
perspective and the prospect for large eddy modelling. Boundary
Layer Meteorology , 96 , 11-32.
Wright, N. (1988) Multigrid solution of elliptic fluid flow prob-
lems, PhD thesis, University of Leeds.
Wright, N.G. and Hargreaves, D.M. (2006) Unsteady CFD simula-
tions for natural ventilation. International Journal of Ventilation ,
5 (1), 13-20.
Xie, Z.-T. and Castro, I.P. (2008) Efficient generation of inflow
conditions for large eddy simulation of street-scale flows. Flow,
Turbulence Combustion , 81 , 449-70.

ε