Holistic Design Applying Innovative Technologies - Smart-ECO Buildings Towards 2020/2030 - page 33

References
7group, B.G. Reed, R. Fedrizzi, The integrative design guide to green building (Wiley, Hoboken,
2009)
Y. Arayci, P. Coates, L. Koskela et al., Technology adoption in the BIM implementation for lean
architectural practice. Autom. Constr. 20 , 189-195 (2011)
F. Ardente, M. Beccali, M. Cellura, M. Mistretta, Energy and environmental benefits in public
buildings as a result of retrofit actions. Renew. Sustain. Energy Rev. 15 , 460-470 (2011)
C.P. Arrau, M.A. Peña (2011) Urban Heat Islands (UHIs). http://www.urbanheatislands.com .
Accessed 27 Dec 2013
K. Barlish, K. Sullivan, How to measure the benefits of BIM—a case study approach. Autom.
Constr. 24 , 149-159 (2012)
J.C. Berndtsson, Green roof performance towards management of runoff water quantity and qual-
ity: a review. Ecol. Eng. 36 , 351-360 (2010)
G.A. Blengini, Life cycle of buildings, demolition and recycling potential: a case study in Turin,
Italy. Build. Environ. 44 , 319-330 (2009)
G.A. Blengini, T. Di Carlo, The changing role of life cycle phases, subsystems and materials in
the LCA of low energy buildings. Energy Build. 42 , 869-880 (2010)
D. Bryde, M. Broquetas, J.M. Volm, The project benefits of building information modelling
(BIM). Int. J. Project Manage. 31 , 971-980 (2013)
L. Cabeza, L. Rincón, V. Vilariño et al., Life cycle assessment (LCA) and life cycle energy analy-
sis (LCEA) of buildings and the building sector: a review. Renew. Sustain. Energy Rev. 29 ,
394-416 (2014)
T. Carter, A. Keeler, Life-cycle cost-benefit analysis of extensive vegetated roof systems. J.
Environ. Manage. 87 , 350-363 (2008)
C. Cheng, Study of the inter-relationship between water use and energy conservation for a build-
ing. Energy Build. 34 , 261-266 (2002)
T. Crosbie, N. Dawood, S. Dawood, Improving the energy performance of the built environment:
the potential of virtual collaborative life cycle tools. Autom. Constr. 20 , 205-216 (2011)
R. Crowford (2011) Life cycle water analysis of an Australian residential building and its occu-
pants. in Proceedings of 7th Australian Conference on Life Cycle Assessment , Australian Life
Cycle Assessment Society, Melbourne, 9-10 Mar 2011
P. Crowther (2000) Developing guidelines for design for deconstruction. in Proceedings of the
“Deconstruction—Closing the Loop” conference , BRE, Watford, UK, 18 May 2000
M.K. Dixit, J.L. Fernández-Solís, S. Lavy, C.H. Culp, Identification of parameters for embodied
energy measurement: a literature review. Energy Build. 42 , 1238-1247 (2010)
M.K. Dixit, J.L. Fernández-Solís, S. Lavy, C.H. Culp, Need for an embodied energy measure-
ment protocol for buildings: a review paper. Renew. Sustain. Energy Rev. 16 , 3730-3743
(2012)
B. Dunster, C. Simmons, B. Gilbert, The ZEDbook (Taylor & Francis, Abingdon, 2008)
ECO 2 (2011) http://www.eCO2wood.com
EEA (2006) Urban sprawl in Europe. The ignored challenge. http://www.eea.europa.eu/
publications/eea_report_2006_10 . Accessed 27 Dec 2013
G. Finnveden, A. Moberg, Environmental systems analysis tools e an overview. J. Clean. Prod.
13 , 1165-1173 (2005)
M. Gorgolewski, Designing with reused building components: some challenges. Build. Res. Inf.
36 (2), 175-188 (2008)
N. Gu, K. London, Understanding and facilitating BIM adoption in the AEC industry. Autom.
Constr. 19 , 988-999 (2010)
D. Hallberg, J. Akander, B. Stojanovi´, M. Kedbäck (2008) Life cycle management system—a
planning tool supporting long-term based design and maintenance planning. in Proceedings
of 11DBMC international conference on durability of building materials and components ,
Istanbul, 11-14 May 2008