Information Technology Reference
In-Depth Information
3.
In the pull-down next to the ring selection, select the Access List that provides the
desired filter.
4.
Click
Save
.
Figure 12-8 shows an Access List applied to a Remote Destination.
Figure 12-8
Applying an Access List to a Remote Destination
Step 9: Configure Service Parameters
Certain service parameters can be tuned to customize the behavior of the Mobility fea-
tures, as discussed in these steps:
1.
Navigate to
System
>
Service Parameters
. Select the
Server
you want to configure
from the pull-down.
2.
Select the
CallManager
service from the
Service
pull-down.
3.
Scroll down to the
Clusterwide Parameters (System - Mobility)
section.
4.
In the
Inbound Calling Search Space for Remote Destination
field, choose either
Trunk or Gateway Inbound Calling Search Space
(the default, which uses the CSS
of the trunk or gateway that is routing the inbound call from the Remote Destination)
or
Remote Destination Profile + Line Calling Search Space
(which uses the com-
bined line and Remote Destination Profile CSS).
5.
In the
Matching Caller ID with Remote Destination
field, select either
Complete
Match
(the default, which requires the incoming Caller ID to exactly match the