Information Technology Reference
In-Depth Information
3.
Enter a Hunt Pilot number. This behaves the same way as a Route Pattern; you can
specify any string you like, including a valid PSTN or DID number.
4.
Set a
Partition
, if desired, to control access to the Hunt Pilot.
5.
In the
Hunt List
field, select the Hunt List that should be accessed by dialing this
Hunt Pilot number.
6.
Specify an
Alerting Name
, which displays on phones receiving calls as part of the
hunting system.
7.
Set
Hunt Forwarding
options to control where calls that cannot be handled by the
hunting system are sent. The
Use Personal Preferences
checkbox ignores the config-
ured settings, instead using the CFNC setting of the station that forwarded the call to
the Hunt Pilot.
8.
Click
Save
.
Figure 11-17 shows the Hunt Pilot Configuration page.
Figure 11-17
Hunt Pilot Configuration
Note:
The Phone Button Template and/or Softkey Template can be configured to include
the HLog key, which allows a user to log into or out of a Hunt Group. The CallManager
Service parameter Hunt Group Logoff Notification specifies a ringtone that plays to alert a
user that there is an incoming call that would ring their phone if it were not logged out of
the hunting system. This is useful as a reminder to users that they are logged out if they
return to their desk after an absence.