Hardware Reference
In-Depth Information
8-bit vertical resolution, variable trigger voltage on channel 0, and can sample data indein-
itely.
The hardware of the simplest embodiment of the Xoscillo is just an Arduino board with its
analog inputs connected to the output of the circuit where the waveform is that needs to be
observed. This setup is connected to a PC, and the inputs read by the Arduino are analyzed
and shown on the screen of the PC.
To get started, flash your Arduino with the firmware that comes in the zip file at the link
above. Use the analog inputs from #0 to #3 on your board. Launch the application and in the
menu, go to “File” and then click on “Arduino”. A basic screenshot showing the Xoscillo dis-
playing a simple waveform and a logic analyzer is shown in Figures 6.58 and 6.59 , respect-
ively.
FIGURE 6.58 Screenshot showing the Xoscillo displaying a simple waveform.
 
Search WWH ::




Custom Search