Hardware Reference
In-Depth Information
FIGURE 6.6
Open-source optical rail fabricated from OpenBeam using a printed magnetic
base.
FIGURE 6.7
Open-source optical rail fabricated from OpenBeam using printed T-brackets.
Optical components are atached via 8-mm-diameter smooth rods centered directly above
the beam using a simple rod holder
18
(
Figure 6.8
) or via an offset rod holder
19
(
Figure 6.9
) de-
pending on your experiment. In some experimental setups, a vibration-isolated optical table
is a necessity; however, for many experiments, this is costly overengineering. While avoiding
Search WWH ::
Custom Search