Hardware Reference
In-Depth Information
21. Arnot R. The RepRap project - open source meets 3D printing. In:
Computer and in-
formation science seminar series
. 2008.
22. Kenzer J, Koch B, Thiim M, Jones RW, Villumsen E. An open source hardware-based
mechatronics project: the replicating rapid 3-D printer. In:
2011 4th International Con-
ference on Mechatronics
. 2011;1-8.
23.
Arduino homepage
. 2013; Available from:
htp://www.arduino.cc/
; 2013.
24. Baechler Christian, DeVuono Mathew, Pearce Joshua M. Distributed recycling of
waste polymer into RepRap feedstock.
Rapid Prototyping J
. 2013;19(2):118-125.
25. Gonzalez-Gomez J, Valero-Gomez A, Prieto-Moreno A, Abderrahim M. A new open
source 3D-printable mobile robotic platform for education.
Adv Autonomous Mini Ro-
bots
2012;49-62.
26.
Anzalone
GC,
Glover
AG,
Pearce
JM.
Open-source
colorimeter.
Sensors
.
2013;13(4):5338-5346.
27. Leigh SJ, Bradley RJ, Purssell CP, Billson DR, Hutchins DA. A simple, low-cost con-
ductive composite material for 3D printing of electronic sensors.
PLoS One
.
2012;7(11):e49365.
28. Redlich TOBIAS, Wulfsberg JP, Bruhns FL. Virtual factory for customized open pro-
duction. In:
Tagungsband 15th International Product Development Management Conference
.
2008; Hamburg.
29. DeVor RE, Kapoor SG, Cao J, Ehmann KF. Transforming the landscape of manufactur-
ing: distributed manufacturing based on desktop manufacturing (DM)2.
ASME DC J
Electron Packag
. July 18, 2012;134. doi 10.1115/1.4006095.
30. Moses Mat, Yamaguchi Hiroshi, Chirikjian Gregory S. Towards cyclic fabrication sys-
tems for modular robotics and rapid manufacturing.
Proc Rob: Sci Syst
2009.
31. Bayless Jacob, Chen Mo, Dai Bing.
Wire embedding 3D printer
. 2010.
32. Bhatia Sangeeta N, Chen Christopher S.
Rapid casting of paterned vascular networks for
perfusable engineered three-dimensional tissues
. 2012.
33. Zhang C, Anzalone NC, Faria RP, Pearce JM. Open-source 3D-printable optics equip-
ment.
PLoS ONE
. 2013;8(3):e59840.
1
I
n Wealth Without Money, Bowyer writes: “The self-copying rapid-prototyping machine will allow people to man-
ufacture for themselves many of the things they want, including the machine that does the manufacturing. It is the
irst technology that we can have that will simultaneously make people more wealthy, while reducing the need for
2
MOST RepRap Build
htp://www.appropedia.org/MOST_RepRap_build
For the two person build use:
ht-
3
MOST RepRap User Experience
htp://www.appropedia.org/MOST_HS_RepRap_user_experience
.
4
RepRap Forums
htp://forums.reprap.org/
.
5
RepRap wiki
htp://www.reprap.org
.
6
MOST RepRap Printable component STL iles—
htp://www.thingiverse.com/thing:92321
.
7
I
f you do not know anyone with a 3-D printer and do not have any other form of rapid-prototyping or 3-D
printing services at your institution, there are numerous commercial 3-D printing services available along with in-
dividuals in the RepRap forums that will print the components out for you for a nominal fee. For example, see
ht-
8
Drill bit handles
htp://www.thingiverse.com/thing:91035
.
9
htp://reprap.org/wiki/IRC
. It should be noted that this is an anonymous Internet forum and just like any other an-
onymous forum, you should not take offense or “feed the trolls” that sometimes interject less than useful comments.
The majority of RepRap IRC users are experienced and helpful.
10
Make sure you have the feet facing the correct direction at the botom of the triangle.
Search WWH ::
Custom Search