Hardware Reference
In-Depth Information
FIGURE 5.40
Completely constructed Bowden sheath.
The next step is to prepare the extruder. Remove the printed plastic base on the Bu-
daschnozzle (
Figure 5.41
, the base is printed in black). You may want to keep this black piece
so you can direct mount your extruder to the
x
-axis in the future. Now atach the extruder
mount (blue piece) to the Budaschnozzle using the same screws and tighten the whole Bu-
daschnozzle down as shown in
Figure 5.42
. Atach the Budaschnozzle to the
x
-axis using two
M4 × 20 screws, nuts and washers and your printer should look like it is coming together as in
Search WWH ::
Custom Search