RepRap for Science—How to Use, Design, and Troubleshoot the Self-Replicating 3-D Printer - Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs - page 102

Two 210 mm M8 threaded rod
Ten M8 nut
Sixteen M8 washer
Seven M3 × 20 mm screw
Eight M3 × 10 mm screw
Fifteen M3 washers
Seven M3 nut
Two M2 × 14 mm screw
Two M2 washer
Electromechanical
Two NEMA17 1.8° stepper motor
One Limit switch
5.2.1.3 x-axis
Printed parts
1×_end_plate.stl
1× carriage.stl (ABS)
One belt-clamp.stl
Two belt_terminator.stl
One end-stop-holder.stl
One 12t_T5_pulley.stl
Steel
Two 608ZZ bearing
Two 385 × 8 mm smooth rod
One 50 × 8 mm threaded rod
Two M8 nut
Two M8 washer
Two M8 fender washer
Three M3 × 25 mm screw
Three M3 × 20 mm screw
Five M3 × 10 mm screw
Nine M3 nut
Nine M3 washer
Two M2 × 14 mm screw
Two M2 washer
Electromechanical
One NEMA17 1.8° stepper motor
One Limit switch
5.2.1.4 y-axis
Printed parts
One Y-Motor_bracket.stl
Two belt_terminator.stl
One end-stop-holder.stl
One 12t_T5_pulley.stl
One y_carriage.stl (ABS)
Steel
Four 608ZZ bearing