RepRap for Science—How to Use, Design, and Troubleshoot the Self-Replicating 3-D Printer - Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs - page 101

5.2.1 Bill of materials by component
In order to assist in fast assembly, the BOM from Table 5.1 is broken down here into main com-
ponents. The complete BOM is shown in Figure 5.4 . I recommend purchasing the entire BOM
and then breaking them up and ordering in the follow subcategories, which we will then step
through building.
FIGURE 5.4 The complete BOM for the MOST RepRap.
5.2.1.1 Frame
Printed parts
Four frame-vertex-foot.stl
Two frame-vertex.stl
Two bar-clamp.stl
Steel
Six 370 mm M8 threaded rod
Four 294 mm M8 threaded rod
Three 440 mm M8 threaded rod
Sixty-six M8 nut
Seventy M8 washer
5.2.1.2 z-axis
Printed parts
Two z-motor-mount.stl
Two parametric-coupling.stl
Two bar-clamp.stl
One end-stop-holder.stl
One rod-clamp.stl
Steel
Four LM8UU bearing
Two 350 mm 8 mm smooth rod