Information Technology Reference
In-Depth Information
The
call-forward pattern
command can be configured in telephony service configuration mode, while the
call-forward all
,
call-
forward busy
, and
call-forward noan
command can all be configured under ephone-dn configuration mode.
Call Transfer
Call transfer on CME is configured much like it is for SRST. The following is a sample CME configuration for call transfer:
telephony-service
transfer-system full-consult
transfer-pattern
.T
The significant difference in the example is that the
transfer-system
and
transfer-pattern
commands can be configured under
telephony service configuration mode with CME. Note that it is also possible to override the global call transfer type configuration (as
shown in the example) for a particular ephone-dn by configuring the
transfer-system
{
blind
|
consult
} in ephone-dn configuration
mode.
Call Hunt and Ephone Hunt groups
Call hunt allows a search among ephone-dn dial peers for an available ephone-dn to answer a call. The following example shows the
configuration of call hunt:
ephone-dn
10
number
1001
no huntstop
preference
1
call-forward noan
1501
!
ephone-dn
20
number
1001
preference
2
call-forward busy
1501
call-forward noan
1501
!
ephone 1
mac-address
0009.E8FC.1B38
button
1:10 2:20
In this example, two ephone-dns are configured with the same extension (1001). One of the DNs is assigned to button 1 of ephone 1,
and the other DN is assigned to button 2 of ephone 1. The second of the two DNs provides call waiting notification for DN 1001 if the
