Civil Engineering Reference
In-Depth Information
Habert G., billard C., rossi P., Chen C., roussel N. 2010. Cement production technology
improvement compared to factor 4 objectives.
Cement and Concrete Research
,
40
,
820-826.
Habert G., d'espinose de Lacaillerie J.b., roussel N. 2011. an environmental evaluation
of geopolymer based concrete production: reviewing current research trends.
Journal
of Cleaner Production
,
19
, 1229-1238.
Hendriks C.a., Worrell e., deJager D., block K., riemer P. 2011. emission reduction of
greenhouse gases from the cement industry. www.wbcsdcement.org/pdf/tf1/prghgt42.
accessed 08/11/11.
Herfort D., Moir H.K., Johansen V., Sorrentino F., bolio arceo H. 2010. the
chemistry of Portland cement clinker.
Advances in Cement Research
,
22
, 187-
194.
Hills L., Johansen V.C. 2007. Hexavalent chromium in cement manufacturing: literature
review.
PCA R&D Serial No. 2983
. Skokie: PCa.
Houghton J.t., Meira Filho L.G., Lim b., tréanton K. (eds.) 1996.
Revised 1996 IPCC
Guidelines for National Greenhouse Gas Inventories, Greenhouse Gas Inventory
Reference Manual
(Volume 3). Bracknell: Meteorological Office.
Humphreys K., Mahasenan M. 2002.
Toward a sustainable cement industry. Substudy
8: Climate change
. Geneva: WbCSD.
Huntzinger D.N., Eatmon T.D. 2009. A life-cycle assessment of Portland cement
manufacturing: comparing the traditional process with alternative technologies.
Journal
of Cleaner Production
,
17
, 668-675.
Iea 2007.
Tracking industrial energy efficiency and CO
2
emissions
. international energy
agency: Paris.
JCr 2000.
Integrated Pollution Prevention and Control (IPPC): Reference Document
on Best Available Techniques in the Cement and Lime Manufacturing Industries
.
european Commission.
Jintao H., Qishou L., Jiaotong X., Yang P., Jinzhou H. 2009. Waste heat recovery.
World
Cement
,
40
, 62-66.
Josa a., aguado a., Heino a., byars e., Cardim a. 2004. Comparative analysis of
available life cycle inventories of cement in the eU.
Cement and Concrete Research
,
34
, 1313-1320.
Josa a., aguado a., Cardim a., byars e. 2007. Comparative analysis of the life cycle
impact assessment of available cement inventories in the eU.
Cement and Concrete
Research
,
37
, 781-788.
Kaantee U. 2004. Cement manufacturing using alternative fuels and the advantages of
process modeling.
Fuel Processing Technology
,
85
, 293-301.
Klein H., Hoening V. 2006. Model calculations of the fuel energy requirement for the
clinker burning process.
Cement International
,
3
, 45-63.
Lafarge 2006.
Sustainable report
. technical report. Lafarge.
Lei Y., Zhang Q., Nielsen C., He K. 2011. an inventory of primary air poluutants and CO
2
emissions from cement production in China, 1990-2020.
Atmospheric Environment
,
45
, 147-154.
Madlool N.a., Saidur r., Hossain M.S., rahim N.a. 2011. a critical review on energy
use and savings in the cement industries.
Renewable and Sustainable Energy Reviews
,
15
, 2042-2060.
Maki I. 2006. Formation and microscopic textures of Portland cement clinker minerals,
part 1.
Cement Wapno Beton
,
2
, 65-85.
McLellan b.C., Williams r.P., Lay J., van riessen a., Corder G.D. 2011. Costs and
