Concrete with polymeric wastes - Eco-efficient Concrete - page 331

Modro, n.l.; Modro, n.; Modro, n.r.; oliveira, a. (2009) avaliação de concreto de
cimento Portland contendo resíduos de PeT. Revista Matéria , Vol.14, 725-736.
Mohammed, B.S. (2010) Structural behavior and m-k value of composite slab utilizing
concrete containing crumb rubber. Construction and Building Materials , Vol.24, pp.
1214-1221.
Mounanga, P.; gbongbon, W.; Poullain, P.; Turcry, P. (2008) Proportioning and
characterization of lightweight concrete mixtures made with rigid polyurethane foam
wastes. Cement and Concrete Composites , Vol.30, 806-814.
nagdi, K. (1993) Rubber as an engineering material: Guidelines for user . hanser
Publication.
naik, T.; Singh, S. (1991) Utilization of discarded tyres as construction materials for
transportation facilities. report no. cBU - 1991-02, UWM center for by-products
utilization. University of Wisconsin, Milwaukee, 16.
naik, T.; Singh, S.; Wendorf, r. (1995) applications of scrap tire rubber in asphaltic
materials: state of the art assessment. report no. cBU-1995-02, UWM center for
by-products utilization. University of Wiscosin, Milwaukee, 49.
Ochi, T.; Okubo, S.; Fukui, K. (2007) Development of recycled PET fibre and its application
as concrete-reinforcing fibre. Cement and Concrete Composites , Vol.29, 448-455.
oikonomou, n.; Mavridou, S. (2009) The use of waste tyre rubber in civil engineering
works. in Sustainability of construction materials , ed. J. Khatib, Woodhead Publishing
limited.
oiknomou, n.; Stefanidou, M.; Mavridou, S.(2006) improvement of the bonding between
rubber tire particles and cement paste in cement products. 15th conference of the
Technical chamber of greece, alexandroupoli, greece, 234-242.
Panyakapo, P.; Panyakapo, M. (2008) reuse of thermosetting plastic waste for lightweight
concrete. Waste Management , Vol.28, 1581-1588.
Pierce, C.; Williams, R. (2004) Scrap tire rubber modified concrete: Past, present and
future. in Used/Post-consumer Tires, Proceedings of the International Conference on
Sustainable Waste Management and recycling, Research Group , eds M., limbachiya
& J., roberts, Thomas Telford, 1-16.
raghavan, D.; huynh, h.; Ferraris, c. (1998) Workability, mechanical properties, and
chemical stability of a recycled tyre rubber filled cementitious composite. Journal of
Materials Science , Vol.33, 1745-1752.
rebeiz, K. (1994) Precast use of polymer concrete using unsaturated polyester resin based
on recycled PeT waste. Construction and Building Materials , Vol.10, 215-220.
rebeiz, K. (1995) Time temperature properties of polymer concrete using recycled PeT.
Cement and Concrete Composites , Vol.17, 119-124.
rebeiz, K.; Fowler, D. (1996) Flexural strength of reinforced polymer concrete made
with recycled plastic waste. ACI Structural Journal , Vol.93, 524-530.
rebeiz, K.; Fowler, D.; Paul, D. (1994a) Mechanical properties of polymer concrete
systems made with recycled plastic, ACI Materials Journal , Vol.91, 40-45.
rebeiz, K.; Serhal, S.; Fowler, D. (1994b) Structural behaviour of polymer concrete
beams using recycled plastics, ASCE Journal Materials Civil Engineering , Vol.6,
150-165.
rebeiz, K.; Yang, S.; David, W. (1994c) Polymer mortar composites made with recycled
plastics. ACI Materials Journal , Vol.91, 313-319.
Segre, n.; Joekes, i. (2000) Use of tire rubber particles as addition to cement paste.
Cement and Concrete Research , Vol.30, 1421-1425.
Segre, n.; Monteiro, P.; Sposito, g. (2002) Surface characterization of recycled tire

￿ ￿ ￿ ￿ ￿ ￿