Civil Engineering Reference
In-Depth Information
Bartelings, H., Sterner, T. (1999) Household waste management in a Swedish municipality:
determinants of waste disposal, recycling and composting.
Journal Environmental
and Resource Economics
13
4, 473-491
Belevi, H., Stämpfli, D.M., Baccini, P. (1992) Chemical behaviour of municipal solid
waste incinerator bottom ash in monofills.
Waste Management & Research
10
, 2,
153-167
Berg, E., Neal, J.A. (1992) Municipal waste combustor ash in concrete.
Proceedings of
the Fifth International Conference on municipal solid waste combustor ash utilization
.
Edited by Chesner W.H. and Roethel. F.J. Arlington, November 17-18, 1992,
p. 155-170
Bertolini, L., Carsana, M., Cassago, D., Collepardi, M., Curzio Q. (2004) MSWI ashes
as mineral additions in concrete.
Cement and Concrete Research
34
, 1899-1906
Bethanis, S., Cheeseman, C.R., Sollars, C.J. (2002) Properties and microstructure of
sintered incinerator bottom ash.
Ceramics International
28
, 881-886
Bethea, r.M. (1978)
Air pollution control technology: An engineering analysis point of
view.
New york: Van Nostrand reinhold
Blue ridge environmental Defense League (2009)
Technical Report on: Waste gasification:
Impacts on the Environment and Public Health
Boghetich, G., Liberti, L., Notarnicola, M., Palma, M., Petruzzelli, D. (2005) Chloride
extraction for quality improvement of municipal solid waste incinerator ash for the
concrete industry.
Waste Management & Research
23
, 57
-
61
Brunner, C.r. (1991)
Handbook of Incineration Systems
. New york: McGraw-Hill.
Burnley, S.J. (2007) A review of municipal solid waste composition in the United
Kingdom.
Waste Management
27
, 10, 1274-1285
Chandler, J.A., van der Sloot, H., Eighmy, T.T., Hartlén, J., Hjelmar, O., Kosson,
D.S., Sawell, S.E., Vehlow, J. (1997)
Municipal Solid Waste Incinerator Residues
.
International Ash Working Group Municipal Solid Waste Incinerator Residues Elsevier
Studies in environmental Science no. 67
Cheeseman, C.R., Makinde, A., Bethanis, S. (2005) Properties of lightweight aggregate
produced by rapid sintering of incinerator bottom ash.
Resources, Conservation and
Recycling
,
43
, 2, 147-162
Chimenos, J.M., Segarra, M., Fernandez, M.A., Espiell, F. (1999) Characterization of
the bottom ash in municipal solid waste incinerator.
Journal of Hazardous Materials
A
64
, 211-222
Collivignarelli, C., Sorlini, S. (2002) Reuse of municipal solid wastes incineration fly
ashes in concrete mixtures.
Waste Management
22
, 909-912
Cresswell, D. (2007) Municipal waste incinerator ash in manufactured aggregate.
MIRO
Characterisation of Mineral Wastes, Resources and Processing technologies - Integrated
waste management for the production of construction material
, WrT 177/Wr0115
Damidot, D., Stronach, S., Kindness, A., Atkins, M., Glasser, F.P (1994) Thermodynamic
investigation of the CaO-Al
2
O
3
-CaCO
3
-H
2
O system at 25°C and the influence of Na
2
O
Cement and Concrete Research
24
, 563-572
Dean, r. (ed) (1988)
Incineration of municipal waste
. Academic Press Inc
Derie, r., Depaus, C. (1999) Behavior of organic and inorganic pollutants during Neutrec
process of stabilization of MSWI fly ash. In
Waste Stabilisation and Environment:
towards the definition of objectives for stabilization of industrial wastes by taking
into account the potential impact on health and the environment
, Société alpine de
publications, Grenoble, France.
Dimech, C., Cheeseman, C.R., Cook, S., et al. (2008) Production of sintered materials
