Blade materials, testing methods and structural design - Wind Power Generation and Wind Turbine Design - page 461

[10] Rice, J.R., A path independent integral and the approximate analysis of strain

concentrations by notches and cracks. Journal of Applied Mechanics , 35 ,
pp. 379-386, 1968.
Suo, Z., Bao, G. & Fan, B., Delamination R-curve phenomena due to damage. [11]

Journal of Mechanical Physics of Solids , 40 , pp. 1-16, 1992.
ISO 527-4: Plastics - Determination of tensile properties - Part 4: Test [12]

conditions for isotropic & orthotropic fi bre-reinforced plastic composites, 1997.
ISO 13003:2003(E), Fibre-reinforced plastics - Determination of fatigue [13]

properties under cyclic loading conditions, 2003.
ASTM Standard D790-03, Flexural properties of unreinforced and rein-

[14]

forced plastics and electrical insulating materials, American Society for
Testing & Materials, West Conshohocken, Pennsylvania (fi rst issued in
1970), 2003.
ASTM Standard D6272-02, Flexural properties of unreinforced and rein- [15]

forced plastics and electrical insulating materials by four-point bending,
American Society for Testing & Materials, West Conshohocken, Pennsylvania
(fi rst issued in 1998), 2002.
ISO 14126:1999(E), Fibre-reinforced composites - Determination of com- [16]

pressive properties in the in-plane direction, 1999.
Bech, J., Goutianos, S., Andersen, T.L., Torekov, R.K. & Brøndsted, P.,

[17]

A new static and fatigue compression tests method for composites. Strain ,
doi: 10.1111/ j.1475-1305.2008.00521.x, 2008.
ASTM Standard D2344-00, Short beam strength of polymer matrix compos- [18]

ite materials and their laminates by short-beam method, American Society
for Testing and Materials, West Conshohocken, Pennsylvania (fi rst published
in 1965), 2000.
ASTM Standard D5379-98, Standard test method for shear properties of

[19]

composite materials by the V-Notched beam method, American Society for
Testing & Materials, West Conshohocken, Pennsylvania (fi rst published in
May 1993), 1998.
ASTM D4762-08, Standard guide for testing polymer matrix compos-

[20]

ite materials, ASTM International, West Conshohocken, PA 19428-2959
USA, 2008.
ASTM D5528-01, Standard test for Mode I interlaminar fracture toughness [21]

of unidirectional fi ber-reinforced polymer matrix composites, American
Society for Testing & Materials, West Conshohocken, Pennsylvania, 2001.
Carlsson, L.A., Gillespie Jr., J.W. Jr. & Pipes, R.B., On the analysis & [22]

design of the end notch fl exure (ENF) specimen for mode II testing. Journal
of Computational Materials , 20 , pp. 594-604, 1986.
Reeder, J.R. & Crews Jr., J.H., Redesign of the mixed-mode bending

[23]

delamination testing. Journal of Composites Technology and Research , 14 ,
pp. 12-19, 1992.
Plausinis, D. & Spelt, J.K., Application of a new constant G load-jig to creep [24]

crack growth in adhesive joints. International of Journal of Adhesion &
Adhesives , 15 , pp. 225-232, 1995.