Environmental Engineering Reference
In-Depth Information
Meyerhof, G. G. 1976. Bearing capacity and settlement of pile foundations,
Journal of Geotechnical
Engineering, ASCE
, 102, 195-228.
Najjar, S. S. and Gilbert, R. B. 2009. Importance of lower-bound capacities in the design of deep foun-
dations,
Journal of Geotechnical and Geoenvironmental Engineering, ASCE
, 135(7), 890-900.
NRC 1995.
National Building Code of Canada,
Ottawa: National Research Council Canada.
O'Neill, M. W. and Reese, L. C. 1999
. Drilled Shafts: Construction Procedures and Design Methods,
Publication No. FHWA-IF-99-025,
Washington, DC: Federal Highway Administration.
Orchant, C. J., Kulhawy, F. H. and Trautmann, C. H. 1988.
Reliability-Based Foundation Design for
Transmission Line Structures, Vol. 2: Critical Evaluation of In-Situ Test Methods
, EL-5507 Final
Report, Palo Alto: Electrical Power Institute.
Paikowsky, S. G. and Stenersen, K. L. 2000. The performance of the dynamic methods, their controlling
parameters and deep foundation specifications,
Proceedings of the Sixth International Conference
on the Application of Stress-Wave Theory to Piles
. Rotterdam: A. A. Balkema, 281-304.
Peck, R. B. 1969. Advantages and limitations of the observational method in applied soil mechanics,
Geotechnique
, 19, 171-187.
Phoon, K. K., Kulhawy, F. H. and Grigoriu, M. D. 2003. Development of a reliability-based design frame-
work for transmission line structure foundations,
Journal of Geotechnical and Geoenvironmental
Engineering, ASCE
, 129(9), 798-806.
Raiffa, H. and Schlaifer, R. 2000.
Applied Statistical Decision Theory
, New York: Wiley.
Sidi, I. D. 1985. Probabilistic prediction of friction pile capacities, PhD thesis, Urbana-Champaign:
University of Illinois.
US Army Corps of Engineers (USACE) 1993.
Design of Pile Foundations,
New York: ASCE Press.
Whitman, R. V. 1984. Evaluating calculated risk in geotechnical engineering,
Journal of Geotechnical
Engineering, ASCE
, 110, 145-188.
Withiam, J. L., Voytko, E. P., Barker, R. M., Duncan, J. M., Kelly, B. C., Musser, S. C. and Elias, V.
2001.
Load and Resistance Factor Design (LRFD) for Highway Bridge Substructures
, Report No.
FHWA HI-98-032, Washington, DC: Federal Highway Administration.
Zhang, L. M. 2004. Reliability verification using proof pile load tests,
Journal of Geotechnical and
Geoenvironmental Engineering, ASCE
, 130, 1203-1213.
Zhang, L. M. and Dasaka, S. M. 2010. Uncertainties in geologic profiles vs. variability in pile founding
depths.
Journal of Geotechnical and Geoenvironmental Engineering, ASCE
, 136(11), 1475-1488.
Zhang, L. M., Li, D. Q. and Tang, W. H. 2006a. Impact of routine quality assurance on reliability of
bored piles.
Journal of Geotechnical and Geoenvironmental Engineering, ASCE
, 132(5), 622-630.
Zhang, L. M., Li, D. Q. and Tang, W. H. 2006b. Level of construction control and safety of driven piles,
Soils and Foundations
, 46(4), 415-425.
Zhang, L. M., Tang, W. H. and Ng, C. W. W. 2001. Reliability of axially loaded driven pile groups,
Journal of Geotechnical and Geoenvironmental Engineering ASCE
, 127, 1051-1060.
Zhang, L. M., Tang, W. H., Zhang, L. L. and Zheng, J. G. 2004. Reducing uncertainty of prediction
from empirical correlations,
Journal of Geotechnical and Geoenvironmental Engineering, ASCE
,
130, 526-534.
Search WWH ::
Custom Search