Biomedical Engineering Reference
In-Depth Information
[48] Reed T.B., “An overview of the current status of biodiesel.Proc.” 1st Biomass Conf.
Americas:
Energy, Environment, Agri- culture, and Industry.
August 30 - September 2.
Burlington, Vermont, 1993. USA
[49] Wagner L.E., Clark S.J., and Schrock M.D.,
“Effects of Soybean Oil Esters on the
Performance, Lubricating Oil, and Wear of Diesel Engines.”
SAE Paper
No. 841385.,
1984
[50] McDonald J.F., Purcell D.L., McClure B.T., and Kittelson D.B.,
“Emissions
Characteristics of Soy Methyl Ester Fuels in a IDI Compression Ignition Engine.” SAE
Paper
No. 950400., 1995.
[51] Pischinger G.M., Falcon A.M., Siekmann R.W., and Fernandes F.R., “Methylesters of
plant oils as diesels fuels, either straight or in blends vegetable oil fuels.”
ASAE Paper
No. 4-82., 1982.
[52] Peterson C.L., Reece D.L., Hammond B.J., Thompson J., and Beck S.M.,
“Processing,
characterization and performance of eight fuels from lipids.”
ASAEPaper
No. 946531.,
1994.
[53] Sharp C.A.,
“Transient Emissions Testing of Biodiesel in a DDC 6V-92TA DDEC
Engine. Final Report to the National Biodiesel Board.”
SWRI Report No. 6602 &
6673 Southwest Research Institute. San Antonio, TX. USA, 1994.
[54] Midwest Biofuels, Inc.
“Biodiesel Cetane Number Engine Testing Comparison to
Calculated Cetane Index Number.”
Final Report to the National Biodiesel Board, New
York, USA. 1993.
[55] Marchetti J.M, Miguel V.U., and Errazu A.F., “Possible methods for biodiesel
production.”
Renewable and Sustaina-Ble Energy Reviews,
FAO Press, Rome, Italy (in
press), 2007.
[56] Rakopoulos C.D., Antonopoulos K.A., Rakopoulos D.C., Hountalas D.T., and
Giakoumis E.G., “Comparative performance and emissions study of a direct injection
Diesel engine using blends of diesel fuel with vegetable oils or bio-diesels of various
origins.”
Energy Conversion and Manag.
, 2006.
[57] McCormick R., Graboski M., Alleman T., Herring A., and Shainetyson K., “Impact of
biodiesel source material and chemical structure on emissions of criteria pollutants
from a heavy-duty engine.”
Environ. Sci. Technol.,
35
, 2001.Page: 1742-1747.
[58] Van Gerpen J., Shanks B., Pruszko R., Clements D., and Knothe G.,
“Biodiesel
Analytical Methods.”
NREL/SR-510-36240. 2004.
[59] Wang W.G., Lyons D.W., Clark N.N., and Gautam G., and Norton P.M., “Emissions
from nine heavy trucks fueled by diesel and biodiesel blend without engine
modification.”
Environ. Sci. Technol.,
34
, 2000. Page:933-939.
[60] Kinast J.A., “Production of Biodiesels from Multiple Feedstocks and Properties of
Biodiesels and Biodiesel/ Diesel Blends.” Final Report.
National Renewable Energy
Laboratory.
1617 Cole Boulevard Golden, CO, USA. 2003.
[61] Gragg K., “Effects of Environmentally Classified Diesel Fuels, RME and Blends of
Diesel Fuels and RME on the Exhaust Emissions.”
Final Report., Swedish Environ.
Prot. Agency.
Bilprovning Press, Stockholm, Sweden. 1994.
[62] Peterson C.L., Haines H., and Chase C., “Rapeseed and Safflower Oils as Diesel
Fuels.” Proc. 1st Biomass Conf., Americas:
Energy, Environment, Agriculture, and
Industry,
August 30 - September 2, Burlington, Vermont, USA. 1993.
