Biomedical Engineering Reference
In-Depth Information
•
Today, research works are mainly investigating the effect of stereolithography
on the cell adhesion, proliferation and differentiation. There is a need for works
on the influence of the processing parameters, such as the light intensity and the
exposure time on the phenotype of the cells.
Acknowledgements
This work was supported by the Portuguese Foundation for Science and
Technology through the projects PTDC/EME-PME/098037/2008 and Pest-OE/EME/UI4044/2011.
References
1. Almeida H, Bártolo PJ (2010) Virtual topological optimisation of scaffolds for rapid proto-
typing. Med Eng Phys 32:775-782
2. Arcaute K, Mann B, Wicker R (2010) Stereolithography of spatially controlled multi-
material bioactive poly(ethylene glycol) scaffolds. Acta Biomater 6:1047-1054
3. Arcaute K, Mann BK, Wicker RB (2006) Stereolithography of three-dimensional bioactive
poly(ethylene glycol) constructs with encapsulated cells. Ann Biomed Eng 34:1429-1441
4. Arcaute K, Mann BK, Wicker RB (2011) Practical use of hydrogels in stereolithography for
tissue engineering applications. In: Bártolo PJ (ed) Stereolithography: materials, processes
and applications. Springer, Berlin, pp 299-331
5. Bae MS, Yang DH, Lee JB, Heo DN, Kwon Y-D, Youn IC, Choi K, Hong JH, Kim GT, Choi
YS, Hwang EH, Kwon IK (2011) Photo-cured hyaluronic acid-based hydrogels containing
simvastatin as a bone tissue regeneration scaffold. Biomaterials 32:8161-8171
6. Bártolo P, Chua CK (2008) Editorial: celebrating the 70th anniversary of professor Yongnian
Yan: a life dedicated to science and technology. Virtual Phys Prototyp 3:189-191
7. Bartolo P, Domingos M, Gloria A, Ciurana J (2011) BioCell printing: integrated automated
assembly system for tissue engineering constructs. CIRP Ann 60:271-274
8. Bartolo P, Kruth JP, Silva J, Levy G, Malshe A, Rajurkar K, Mitsuishi M, Ciurana J, Leu
M (2012) Biomedical production of implants by additive electro-chemical and physical pro-
cesses. CIRP Ann 61:635-655
9. Bártolo P, Mendes A, Jardini A (2004) Bio-prototyping. In: Collins MW, Brebbia CA (eds)
Design and nature II. WIT Press, Ashurst, pp 535-543
10. Bártolo PJ (2001) Optical approaches to macroscopic and microscopic engineering. PhD
thesis, University of Reading, UK
11. Bártolo PJ (2006) State of the art of solid freeform fabrication for soft and hard tissue engi-
neering. In: Design and nature III: comparing design in nature with science and engineering,
pp 233-243
12. Bartolo PJ (2007) Photo-curing modeling: direct irradiation. Int J Adv Manuf Technol
32:480-491
13. Bartolo PJ (2011) Stereolithographic processes. In: Bartolo PJ (ed) Stereolithography: mate-
rials, processes and applications. Springer, Berlin, pp 1-36
14. Bartolo PJ, Chua CK, Almeida HA, Chou SM, Lim ASC (2009) Biomanufacturing for tissue
engineering: present and future trends. Virtual Phys Prototyp 4:203-216
15. Bártolo PJ, Domingos M, Patrício T, Cometa S, Mironov V (2011) Biofabrication strategies
for tissue engineering. In: Fernandes PR, Bartolo PJ (eds) Advances on modeling in tissue
engineering. Springer, Berlin, pp 137-176
16. Bartolo PJ, Gaspar J (2008) Metal filled resin for stereolithography metal part. CIRP Ann
57:235-238
17. Bartolo PJ, Mitchell G (2003) Stereo-thermal-lithography: a new principle for rapid proto-
typing. Rapid Prototyping J 9:150-156
18. Bártolo PJS, Almeida H, Laoui T (2009) Rapid prototyping and manufacturing for tissue
engineering scaffolds. Int J Comput Appl Technol 36:1-9
Search WWH ::
Custom Search