Environmental Engineering Reference
In-Depth Information
Jiang L, Agrawal AK, Taylor RP (2014) Clean combustion of different liquid fuels using a novel
fuel injector. Exp Thermal Fluid Sci 57:275
-
284
Lefebvre AH (1989) Atomization and spray. Hemisphere Publishing
Lefebvre AH (1999) Gas turbine combustion, 2nd edn. Taylor and Francis Publications
Li TX, Zhu DL, Akafuah NK, Saito K, Law CK (2011) Synthesis, droplet combustion, and sooting
characteristics of biodiesel produced from waste vegetable oils. Proc Combust Inst 33(2):2039
-
2046
Mansour A (2005) Gas Turbine fuel injection technology. ASME Paper GT-2005-68173
McDonell VG, Samuelsen S (1991) Gas and drop behavior in reacting and non-reacting airblast
atomizer sprays. J Propul Power 7:684
691
Metzger B (2007) Glycerol combustion, M.S. Thesis, North Carolina State University, NC
Nakamura S, McDonell V, Samuelsen S (2006) The effect of liquid-fuel preparation on gas turbine
emissions. ASME Paper GT-2006-90730
Pan KL, Li JW, Chen CP, Wang CH (2009) On droplet combustion of biodiesel fuel mixed with
diesel/alkanes in microgravity condition. Combust Flame 156(10):1926
-
1936
Panchasara H, Sequera D, Schreiber W, Agrawal AK (2009a) Emission reductions in diesel and
kerosene flames using a novel fuel injector. J Propul Power 25(4):984
-
986
Panchasara HV, Simmons BM, Agrawal AK (2009b) Combustion performance of biodiesel and
diesel-vegetable oil blends in a simulated gas turbine burner. J Eng Gas Turbines Power 131
(3):1
-
11 031503
Park SH, Cha J, Lee CS (2011) Spray and engine performance characteristics of biodiesel and its
blends with diesel and ethanol fuels. Combust Sci Technol 183(8):802
-
822
Porter L (2007) NASA
-
s new aeronautics research program overview. Presented at the AIAA
Aerospace Science Meeting, Reno, NV, Jan., 2007.
http://www.aeronautics.nasa.gov/pdf/
Raghavan V, Rajesh S, Parag S, Avinash V (2009) Investigation of combustion characteristics of
biodiesel and its blends. Combust Sci Technol 181(6):877
'
891
Razdan MK (1998) Fuel/Air preparation in the design of low emissions gas turbine combustion
systems. Proceedings of fourteenth NATO RTO meeting on gas turbine combustion emissions
and alternative fuels, Paper No. 34
Simmons BM, Panchasara HV, Agrawal AK (2008) Effect of fuel injection concept on combustion
performance of liquid biofuels. Session B3: Biofuels, 2008 technical meeting of the central
states section of the combustion Institute, Tuscaloosa, AL, 20
-
22 Apr 2008
Simmons B, Panchasara H, Agrawal AK (2009) A Comparison of air-blast and flow-blurring
injectors using the Phase Doppler Particle Analysis technique. ASME Paper 2009-GT-60239
Simmons BM, Kolhe PS, Taylor RP, Agrawal AK (2010) Glycerol combustion using flow-
blurring atomization. Proceedings of the 2010 central states meeting of the Combustion
Institute, March, 2010
Simmons BM, Agrawal AK (2011) Spray characteristics of a flow-blurring atomizer. Atomization
Sprays 20(9):821
-
825
Simmons B, Agrawal AK (2012) Flow blurring atomization for low-emission combustion of liquid
biofuels. Combust Sci Technol 184:660
-
675
Song J, Alam M, Boehman AL (2007) Impact of alternative fuels on soot properties and DPF
regeneration. Combust Sci Technol 179(9):1991
-
2037
Sovani SD, Sojka PE, Lefebvre AH (2001) Effervescent atomization. Prog Energy Combust Sci
27:483
-
521
Wang X, Huang Z, Kuti OA, Zhang W, Nishida K (2011) An experimental investigation on spray,
ignition and combustion characteristics of biodiesels. Proc Combust Inst 33(2):2071
-
2077
-
Search WWH ::
Custom Search