Environmental Engineering Reference
In-Depth Information
Natarajan J, Kochar Y, Lieuwen T, Seitzman J (2009) Pressure and preheat dependence of laminar
flame speeds of H
2
/CO/CO
2
/O
2
/He mixtures. Proc Combust Inst 32:1261
-
1268
Ollero P, Serrera A, Arjona R, Alcantarilla S (2003) The CO
2
gasi
cation kinetics of olive residue.
Biomass Bioenergy 24:151
-
161
Ouimette P, Seers P (2009) NO
x
emission characteristics of partially premixed laminar flames of
H
2
/CO/CO
2
mixtures. Int J Hydrogen Energy 34:4626
4634
Park J, Hwang DJ, Kim KT, Lee SB, Kee SI (2004) Evaluation of chemical effects of added CO
2
according to
-
565
Patterson MA, Reitz RD (1998) Modeling the effects of fuel spray characteristics on diesel engine
combustion and emission. SAE paper 1998-98-0131
Petersen EL, Kalitan DM, Barrett AB, Reehal SC, Mertens JD, Beerer DJ, Hack RL, McDonell
VG (2007) New syngas/air ignition data at lower temperature and elevated pressure and
comparison to current kinetics models. Combust Flame 149:244
fl
flame location. Int J Energy Res 28:551
-
247
Prathap C, Ray A, Ravi MR (2008) Investigation of nitrogen dilution effects on the laminar
burning velocity and
-
fl
flame stability of syngas fuel at atmospheric condition. Combust Flame
155:145
-
160
Quattrocchi S (2014) Liftoff and blowout characteristics and structure analysis of syngas diffusion
flames. MS thesis, Politecnico Di Torino
Quesito F, Santarelli M, Leone P, Aggarwal SK (2013) Biogas combustion in premixed flames or
electrochemical oxidation in SOFC: exergy and emission comparison. J Energy Res Technol
135:021202-1
-
02120202120202120211
Ranzi E (2012) CRECK modeling
—
C1-C16 low and high temperature. (Online) Available at
and-high-temperature
.
Accessed 2013
Rapagna S, Jand N, Kiennemann A, Foscolo PU (2000) Steam gasification of biomass in a
fl
197
Richards KJ, Senecal PK, Pomraning E (2013) Converge (version 2.1.0). Convergent Science,
Inc., Middleton
Rodrigues M, Walter A, Faaij A (2003) Co-
ring of natural gas and biomass gas in biomass
integrated gasi
cation/combined cycle systems. Energy 28:1115
fluidised-bed of olivine particles. Biomass Bioenergy 19:187
-
1131
Ryu K (2013) Effects of pilot injection timing on the combustion and emissions characteristics in a
diesel engine using biodiesel
-
730
Sahoo BB, Sahoo N, Saha UK (2009) Effect of engine parameters and type of gaseous fuel on the
performance of dual-fuel gas diesel engines
—
a critical review. Renew Sustain Energy Rev
13:1151
-
1184
Sahoo BB, Sahoo N, Saha UK (2012) Effect of H
2
:CO ratio in syngas on the performance of a dual
fuel diesel engine operation. Appl Therm Eng 49:139
-
146
San Diego (2002) The San Diego mechanism. (Online) Available at
http://web.eng.ucsd.edu/mae/
Senecal PK, Pomraning E, Richards KJ (2003) Multi-dimensional modeling of direct injection
diesel spray liquid length and
CNG dual fuel. Appl Energy 111:721
-
-
fl
flame lift-off length using CFD and parallel detailed chemistry.
SAE paper 2003-01-0243
Senecal PK, Richards KJ, Pomraning E, Yang T, Dai MZ, McDavid RM, Patterson MA, Hou S,
Sethaji T (2007) A new parallel cut-cell Cartesian CFD code for rapid grid generation applied
to in-cylinder diesel engine simulations. SAE paper 2007-01-0159
Shah A, Thipse S, Tyagi A, Rairikar S, Kavthekar K, Marathe N, Mandloi P (2011) Literature
Review and Simulation of Dual Fuel Diesel-CNG Engines. SAE Paper 2011-26-0001
Shirk MG, McGuire TP, Neal GL, Haworth DC (2008) Investigation of a hydrogen-assisted
combustion system for a light-duty diesel vehicle. Int J Hydrogen Energy 33:7237
7244
-
Singh S, Liang L, Kong SC, Reitz RD (2006) Development of a
flame propagation model for dual-
fuel partially premixed compression ignition engines. Int J Engine Res 7:65
-
75
Smith GP, Golden DM, Frenklach M, Moriarty NW, Eiteneer B, Goldenberg M, Bowman CT,
Hanson RK, Song S, Gardiner WC, Lissianski VV, Qin Z, GRI Mech-3.0:
http://www.me.
fl
Search WWH ::
Custom Search