Biomedical Engineering Reference
In-Depth Information
Li, L., Sun, J., Li, X., Zhang, Y., Wang, Z., Wang, C., Dai, J., Wang, Q. (2012a). Controllable
synthesis of monodispersed silver nanoparticles as standards for quantitative assessment
of their cytotoxicity.
Biomaterials
33: 1714-1721.
Li, X., Lenhart, J. J., Walker, H. W. (2012b). Aggregation kinetics and dissolution of coated
silver nanoparticles.
Langmuir
28: 1095-1104.
Linsinger, T. P. J., Roebben G., Gilliland, D., Calzolai, L., Rossi, F., Gibson, N., Klein, C. (2012)
Requirements on measurements for the implementation of the European Commission
definition of the term nanomaterial. JRC Reference Report. Luxembourg July 2012.
Liu, J., Pennell, K. G., Hurt, R. H. (2011). Kinetics and mechanisms of nanosilver oxysulfida-
tion.
Environ Sci Technol
45: 7345-7353.
Liu, J., Sonshine, D. A., Shervani, S., Hurt, R. H. (2010). Controlled release of biologically
active silver from nanosilver surfaces.
ACS Nano
4: 6903-6913.
Liu, J., Wang, Z., Liu, F. D., Kane, A. B., Hurt, R. H. (2012). Chemical transformations of
nanosilver in biological environments.
ACS Nano
6: 9887-9899.
Lombi, E., Donner, E., Taheri, S., Tavakkoli, E., Jamting, A. K., McClure, S., Naidu, R.,
Miller, B. W., Scheckel, K. G., Vasilev, K. (2013). Transformation of four silver/silver
chloride nanoparticles during anaerobic treatment of wastewater and post-processing of
sewage sludge.
Environ Pollut
176: 193-197.
Lorenz, C., Hagendorfer, H., von Goetz, N., Kaegi, R., Gehrig, R., Ulrich, A., Scheringer,
M., Hungerbühler, K. (2011). Nanosized aerosols from consumer sprays: Experimental
analysis and exposure modeling for four commercial products.
J Nanopart Res
13:
3377-3391.
Lorenz, C., Windler, L., von Goetz, N., Lehmann, R. P., Schuppler, M., Hungerbühler, K.,
Heuberger, M., Nowack, B. (2012). Characterization of silver release from commer-
cially available functional (nano)textiles.
Chemosphere
89: 817-824.
Lundqvist, M., Stigler, J., Cedervall, T., Berggard, T., Flanagan, M. B., Lynch, I., Elia, G.,
Dawson, K. (2011). The evolution of the protein corona around nanoparticles: A test
study.
ACS Nano
5: 7503-7509.
Ma, R., Levard, C., Marinakos, S. M., Cheng, Y., Liu, J., Michel, F. M., Brown, G. E., Lowry,
G. V. (2012). Size-controlled dissolution of organic-coated silver nanoparticles.
Environ
Sci Technol
46: 752-759.
Meyer, D. E., Curran, M. A., Gonzalez, M. A. (2011). An examination of silver nanoparticles
in socks using screening-level life cycle assessment.
J Nanopart Res
13: 147-156.
Monopoli, M. P., Aberg, C., Salvati, A., Dawson, K. A. (2012). Biomolecular coronas provide
the biological identity of nanosized materials.
Nat Nanotechnol
7: 779-786.
Morrow, P. E. (1988). Possible mechanisms to explain dust overloading of the lungs.
Fundam
Appl Toxicol
10: 369-384.
Nazarenko, Y., Han, T. W., Lioy, P. J., Mainelis, G. (2011). Potential for exposure to engi-
neered nanoparticles from nanotechnology-based consumer spray products.
J Expo Sci
Environ Epidemiol
21: 515-528.
NRC (2009). Science and Decisions: Advancing Risk Assessment. Committee on Improving
Risk Analysis Approaches Used by the U.S. EPA, Board on Environmental Studies
and Toxicology, Division on Earth and Life Studies, National Research Council of the
National Academies., p. 424. The National Academies Press, Washington, D.C.
Oberdörster, G. (1995). Lung particle overload: Implications for occupational exposures to
particles.
Regul Toxicol Pharmacol
21: 123-135.
OECD (1-12-2010). List of Manufactured Nanomaterials and List of Endpoints for Phase One
of the Sponsorship Programme for the Testing of Manufactured Nanomaterials: Revision,
Series on the Safety of Manufactured Nanomaterials No. 27, ENV/JM/MONO(2010)46.
Paris, OECD. http://search.oecd.org/officialdocuments/displaydocumentpdf/?cote=env/
jm/mono%282010%2946&doclanguage=en, 2-12-2013.
Search WWH ::
Custom Search