Biomedical Engineering Reference
In-Depth Information
Maynard, A.D., Zimmer, A.T (2003) Development and validation of a simple numerical model
for estimating workplace aerosol size distribution evolution through coagulation, set-
tling, and diffusion.
Aerosol Sci Technol
37(10): 804-817.
McGarry, P., Morawska, L., Morris, H., Knibbs, L., Capasso, A (2012) “Measurements of
particle emissions from nanotechnology processes, with assessment of measuring tech-
niques and workplace controls.” Safe Work Australia.
Methner, M., Crawford, C., Geraci, C (2012) Evaluation of the potential airborne release of
carbon nanofibers during the preparation, grinding, and cutting of epoxy-based nano-
composite material.
J Occup Environ Hyg
9: 308-318.
Methner, M., Hodson, L., Geraci, C (2010) Nanoparticle emission assessment technique
(NEAT) for the identification and measurement of potential inhalation exposure to engi-
neered nanomaterials part a.
J Occup Environ Hyg
7(3): 127-132.
Nazarenko, Y., Han, T.W., Lioy, P.J., Mainelis, G (2011) Potential for exposure to engi-
neered nanoparticles from nanotechnology-based consumer spray products.
Journal of
Exposure Sci Environ Epidemiol
21: 515-528.
Nazarenko, Y., Zhen, H., Han, T., Lioy, P.J., Mainelis, G (2012) Potential for inhalation
exposure to engineered nanoparticles from nanotechnology-based cosmetic powders.
Environ Health Perspect
120(6): 885-892.
NIOSH (2011) “Current intelligence bulletin 63: occupational exposure to titanium dioxide.”
Department of Health and Human Services, Public health Service, Center for Disease
Control and Prevention. Cincinnati, OH. Publication No. 2011-160.
NIOSH (2013) “Draft current intelligence bulletin: occupational exposure to carbon nano-
tubes and nanofibers. “ US Department of Health and Human Services, Centers for
Disease Control, National Institute for Occupational safety and Health, Cincinnati, OH.
DHHS (NIOSH), NIOSH Docket Number: NIOSH No. 2013-145; Available at http://
www.cdc.gov/niosh/docs/2013-145/pdfs/2013-145.pdf.
Nørgaard, A.W., JensenK. A., Janfelt C.,
Lauritsen F.R., Clausen, P.A.,WolkoffP (2009)
Release of VOCs and particles during use of nanofilm spray products.
Environ Sci
Technol
43: 7824-7830.
Ogura, I., Hiromu, S., Kohei, M., Masashi, G (2011) Release potential of single-wall car-
bon nanotubes produced by super-growth method during manufacturing and handling.
J Nanopart Res
13: 1265-1280.
Quadros, M.E., Marr, L.C (2011) Silver nanoparticles and total aerosols emitted by nanotech-
nology-related consumer spray products.
Environ SciTechnol
45: 10713-10719.
R'mili, B., Le Bihan, O.L.C., Dutouquet, C., Aguerre-Charriol, O., Frejafon, E (2013) Particle
Sampling by TEM Grid Filtration.
Aerosol Sci Technol
47: 767-775. dx.doi.org/10.1021/
es204580f.
Raynor, P.C., Ingraham Cebula, J., Spangenberger, J.S., Olson, B.A., Dasch, J.M., D'Arcy, J.B
(2012) Assessing potential nanoparticle release during nanocomposite shredding using
direct-reading instruments.
J Occup Environ Hyg
9:1: 1-13.
Rim, D., Green, M., Wallace, L., Persily, A., Choi, J.-I (2011) Evolution of ultrafine particle
size distributions following indoor episodic releases: Relative importance of coagula-
tion, deposition and ventilation.
Aerosol Sci
46: 494-503.
Sachse, S., Gendre, L., Silva, F., Zhu, H., Leszczy´ska, A., Pielichowski, K., Ermini, V. and
Njuguna, J (2013) On Nanoparticles release from polymer nanocomposites for applica-
tions in lightweight automotive components.
J Phys Conf Ser
. 429: 012046.
Schlagenhauf, L., Chu, B.T.T., Buha, J., Nuesch, F., Wang, J (2012) Release of carbon nano-
tubes from an epoxy-based nanocomposite during an abrasion process.
Environ Sci
Technol
46(13): 7366-7372.
Schneider, T., Brouwer, D.H., Koponen, I.K., Jensen, K.A., Fransman, W., Van Duuren-Stuurman,
B., Van Tongeren, M., Tielemans, E (2011) Conceptual model for assessment of inhalation
exposure to manufactured nanoparticles.
J Exposure Sci Environ Epidemiol
21(5): 450-463.
Search WWH ::
Custom Search