REFERENCES - Geotechnical Earthquake Engineering - page 654

Foundation, Earthquake Engineering Research Center, College of Engineering, University of
California, Berkeley.
Tokimatsu, K., and Seed, H. B. (1987). “Evaluation of Settlements in Sands due to Earthquake
Shaking.” Journal of Geotechnical Engineering, ASCE, vol. 113, no. 8, pp. 861-878.
Townsend, F. C. (1978). “A Review of Factors Affecting Cyclic Triaxial Tests.” Dynamic
Geotechnical Testing, ASTM Special Technical Publication 654. ASTM, Philadelphia, pp. 356-383.
Uniform Building Code (1997). International Conference of Building Officials, three volumes,
Whittier, CA.
USCOLD (1985). “Guidelines for Selecting Seismic Parameters for Dam Projects,” Report of
Committee on Earthquakes. U.S. Committee on Large Dams.
USGS (1975). Encinitas Quadrangle, San Diego, California. Topographic map was mapped, edited,
and published by the U.S. Geological Survey, Denver, CO.
USGS (1994). USGS Response to an Urban Earthquake, Northridge. Open-File Report 96-263.
Report posted by U.S. Geological Survey on the Internet.
USGS (1996). Peak Ground Acceleration Maps. Maps prepared by the U.S. Geological Survey,
National Seismic Hazards Mitigation Project. Maps obtained from the Internet.
USGS (2000a). Earthquake Internet site. Prepared by U.S. Geological Survey, National Earthquake
Information Center, Golden, CO.
USGS (2000b). Glossary of Some Common Terms in Seismology. United States Geological Survey
Earthquake Hazards Program, National Earthquake Information Center, World Data Center for
Seismology, Denver, CO. Glossary obtained from the Internet.
Vesic, A. S. (1963). “Bearing Capacity of Deep Foundations in Sand.” Highway Research Record, 39.
National Academy of Sciences, National Research Council, Washington, pp. 112-153.
Vesic, A. S. (1967). “Ultimate Loads and Settlements of Deep Foundations in Sand.” Proceedings of
the Symposium on Bearing Capacity and Settlement of Foundations. Duke University, Durham, NC,
p. 53.
Vesic, A. S. (1975). “Bearing Capacity of Shallow Foundations.” Chapter 3 of Foundation
Engineering Handbook. Hans F. Winterkorn and Hsai-Yang Fang, eds. Van Nostrand Reinhold, New
York, pp. 121-147.
Warner, J. (1978). “Compaction Grouting—A Significant Case History.” Journal of the Geotechnical
Engineering Division, ASCE, vol. 104, no. GT7, pp. 837-847.
Warner, J. (1982). “Compaction Grouting—The First Thirty Years.” Proceedings of the Conference
on Grouting in Geotechnical Engineering. W. H. Baker, ed. ASCE, New York, pp. 694-707.
Watry, S. M., and Ehlig, P. L. (1995). “Effect of Test Method and Procedure on Measurements of
Residual Shear Strength of Bentonite from the Portuguese Bend Landslide.” Clay and Shale Slope
Instability, vol. 10. W. C. Haneberg and S. A. Anderson, eds. Geological Society of America,
Reviews in Engineering Geology, Boulder, CO, pp. 13-38.
Wellington, A. M. (1888). “Formulae for Safe Loads of Bearing Piles.” Engineering News, no. 20, pp.
509-512.
Whitman, R. V. (1990). “Seismic Design Behavior of Gravity Retaining Walls.” Proceedings, ASCE
Specialty Conference on Design and Performance of Earth Retaining Structures. Geotechnical
Special Publication 25. ASCE, New York, pp. 817-842.
Whitman, R. V. (1991). “Seismic Design of Earth Retaining Structures,” Proceedings, Second
International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil
Dynamics, St. Louis, Missouri.
Whitman, R. V., and Bailey, W. A. (1967). “Use of Computers for Slope Stability Analysis.” Journal
of the Soil Mechanics and Foundations Division, ASCE, vol. 93, no. SM4, pp. 475-498.
Wilson, R. C., and Keefer, D. K. (1985). “Predicting Areal Limits of Earthquake-Induced Lansliding.”
In Evaluating Earthquake Hazards in the Los Angeles Region, J. I. Ziony, ed. Professional Paper
1360. U.S. Geological Survey, Reston, VA, pp. 317-345.
Wood, J. H. (1973). Earthquake-Induced Soil Pressures on Structures, Report EERL 73-05. Pasadena:
California Institute of Technology, Pasadena, Calif.