REFERENCES - Geotechnical Earthquake Engineering - page 648

Hudson, D. E. (1970). “Dynamic Tests of Full-Scale Structures.” Chapter 7 of Earthquake
Engineering, Robert L. Wiegel, coordinating ed. Prentice-Hall, Englewood Cliffs, NJ, pp. 127-149.
Hynes-Griffin, M. E., and Franklin, A. G. (1984). “Rationalizing the Seismic Coefficient Method.”
Miscellaneous Paper GL-84-13. U.S. Army Corps of Engineers Waterways Experiment Station,
Vicksburg, MS.
Idriss, I. M. (1985). “Evaluating Seismic Risk in Engineering Practice.” Proceedings of the Eleventh
International Conference on Soil Mechanics and Foundation Engineering, vol. 1, San Francisco, pp.
255-320.
Idriss, I. M. (1999). “Presentation Notes: An Update of the Seed-Idriss Simplified Procedure for
Evaluating Liquefaction Potential.” Proceedings, TRB Workshop on New Approaches to
Liquefaction Analysis. Publication no. FHWA-RD-99-165, Federal Highway Administration,
Washington.
Iida, K., Cox, D. C., and Pararas-Carayannis, G. (1967). “Preliminary Catalog of Tsunamis Occurring
in the Pacific Ocean.” Report No. HIG-67-10. Hawaii Institute of Geophysics, University of Hawaii,
Honolulu.
International Building Code (2012). International Code Council, Country Club Hills, Illinois, 690 pp.
Ishihara, K. (1985). “Stability of Natural Deposits During Earthquakes.” Proceedings of the Eleventh
International Conference on Soil Mechanics and Foundation Engineering, vol. 1, San Francisco, pp.
321-376.
Ishihara, K. (1993). “Liquefaction and Flow Failure During Earthquakes.” Geotechnique, vol. 43, no.
3, London, England, pp. 351-415.
Ishihara, K., Sodekawa, M., and Tanaka, Y. (1978). “Effects of Overconsolidation on Liquefaction
Characteristics of Sands Containing Fines.” Dynamic Geotechnical Testing, ASTM Special
Technical Publication 654, ASTM, Philadelphia, pp. 246-264.
Ishihara, K., and Yoshimine, M. (1992). “Evaluation of Settlements in Sand Deposits Following
Liquefaction During Earthquakes.” Soils and Foundations, vol. 32, no. 1, pp. 173-188.
Janbu, N. (1957). “Earth Pressure and Bearing Capacity Calculation by Generalized Procedure of
Slices.” Proceedings of the 4th International Conference on Soil Mechanics and Foundation
Engineering, vol. 2, London, England, pp. 207-212.
Janbu, N. (1968). “Slope Stability Computations.” Soil Mechanics and Foundation Engineering
Report. The Technical University of Norway, Trondheim.
Johansson, J. (2000). “1964 Niigata Earthquake, Japan.” Liquefaction Internet site, University of
Washington, Department of Civil Engineering.
Kanamori, H. (1977). “The Energy Release in Great Earthquakes.” Journal of Geophysical Research,
vol. 82, pp. 2981-2987.
Kayan, R. E., Mitchell, J. K., Seed, R. B., Lodge, A., Nishio, S., and Coutinho, R. (1992). “Evaluation
of SPT-, CPT-, and Shear Wave-Based Methods for Liquefaction Potential Assessments Using Loma
Prieta Data.” Proceedings, 4th Japan-U.S. Workshop on Earthquake Resistant Design of Lifeline
Facilities and Countermeasures for Soil Liquefaction, NCEER-92-0019. National Center for
Earthquake Engineering, Buffalo, NY, pp. 177-192.
Keefer, D. K. (1984). “Landslides Caused by Earthquakes.” Geological Society of America Bulletin,
vol. 95, no. 2, pp. 406-421.
Kennedy, M. P. (1975). “Geology of the Western San Diego Metropolitan Area, California.” Bulletin
200. California Division of Mines and Geology, Sacramento.
Kerwin, S. T., and Stone, J. J. (1997). “Liquefaction Failure and Remediation: King Harbor Redondo
Beach, California.” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, vol. 123,
no. 8, pp. 760-769.
Kramer, S. L. (1996). Geotechnical Earthquake Engineering. Prentice-Hall, Englewood Cliffs, NJ.
Krinitzsky, E. L., Gould, J. P., and Edinger, P. H. (1993). Fundamentals of Earthquake-Resistant
Construction. Wiley, New York.
Ladd, C. C., Foote, R., Ishihara, K., Schlosser, F., and Poulos, H. G. (1977). “Stress-Deformation and
Strength Characteristics.” State-of-the-Art Report, Proceedings, 9th International Conference on